Army Technology

Main

Technology

Army Technology
Cyberwars
Military Technology
Newsfactor Technology
Technology World
Yahoo Technology
Random Feeds

Archives

| Feb 2010 | Dec 2009 | Oct 2009 | Sep 2009 | Aug 2009 | Jun 2009 | May 2009 | Apr 2009 | Mar 2009 | Feb 2009 | Jan 2009 | Dec 2008 | Nov 2008 | Oct 2008 | Sep 2008 | Aug 2008 | Jul 2008 | Jun 2008 | May 2008 | Apr 2008 | Mar 2008 | Feb 2008 | Jan 2008 | Dec 2007 | Nov 2007 | Oct 2007 | Aug 2007 | Jul 2007 |

Sat, 28 Jun 08
Delivery of Last MILIS Thermal Sight to the Greek Army
http://www.army-technology.com/contractors/surveillance/theon/press4.html
On June 24 2008, the last of MILIS (Milan Lightweight Infrared System) thermal sights rolled out of Theon Sensors production line in Koropi, Greece. A total of 147 of these sights were manufactured in Greece by the local company, Theon Sensors, as part of a contract signed with Sagem DÃ©fense SÃ©curitÃ© (Paris, France).

The MILIS thermal sights were a major part of a contract, which was signed in 2003 between the Hellenic Ministry of National Defense and Euromissile, for the upgrade of the MILAN anti-tank system of the Hellenic Army.

The ceremony occurred with the presence of representatives from the General Directorate for Defence Investments and Armaments, the Hellenic Army General Staff, the Embassies of France and Germany in Athens, as well as representatives of Euromissile and Sagem DÃ©fense Securite.

The contract between Theon Sensors and Sagem Defense Securite was signed in October 2004 and the project was implemented as planned while all deliveries were made according to the agreed upon schedule. This program serves as a testimony of a successful cooperation, undertaken in the frame of Industrial Cooperation between the French company and the Greek MoD and included technology transfer, training and sub-contracting work. The work performed by Theon Sensors included fabrication of sight components, assembly, integration and testing as well as final qualification and acceptance tests which were carried out for every sight in the presence of Sagem DÃ©fense SÃ©curitÃ© representatives.

The MILIS thermal imager is a member of the MATIS third generation family of thermal imagers currently developed and produced by Sagem DÃ©fense SÃ©curite. The MILIS uses an afocal type of configuration which means that, it does not have its own aiming system; it is attached on the MILAN day sight thus allowing the use of the main aiming system at night or under low light conditions.

During his address speech, the representative of Sagem DÃ©fense SÃ©curitÃ© expressed the company's satisfaction for the successful cooperation between the two companies and announced that they are in final negotiations for the placement of a new follow on order to Theon Sensors for additional MILIS thermal imagers to fulfill requirements of an international customer.

The President of Theon Sensors, Mr Christian Hadjiminas, mentioned that during the last 12 months the company received orders (mainly for exports) in the order of &uro;70M as opposed to its 2007 turnover of &uro;12M, while its current backlog stands at &uro;92M. Theon currently participates in procurements in 21 countries around the world amounting to &uro;75M.

Fri, 27 Jun 08
Defence Services Asia: High-ranking Visitors from All over the Worldat the KÃ„RCHER Futuretech Stand
http://www.army-technology.com/contractors/nbc/kaercher/press11.html
At the Defence Services Asia DSA in Kuala Lumpur, Malaysia, the largest exhibition in the Asian area, together with its Malaysian partners Corporate Envoy and Challenge Corporation, KÃ¤rcher Futuretech presented its systems for peace-keeping forces. At the 11th edition of this exhibition which took place for the first time in the Putra World Trade Center (PWTC) in the centre of Kuala Lumpur, KÃ„RCHER Futuretech Sales Manager Dirk Waldow, who is in charge of the Asian market, welcomed many high-ranking visitors and interested people from all over the world.

The Malaysian Vice Premier and Minister of Defence, Yab Dato' Sri Mohd Najib Abdul Razak, appeared very impressed with the technology of the trailer-based catering systems. Already since the beginning of this year, the Malaysian Armed Forces have relied on the mobile TFL 25 field laundry. Major General Dato' Oseman Bin Chik, Chief of Logistics of the Royal Malaysian Armed Forces, thanked for the delivery of the first three compact laundry systems and took advantage of the DSA for discussing the final details of this contract with KÃ„RCHER Futuretech Sales Manager Dirk Waldow. The highly mobile water purification systems of the Waterclean series were once again in the focus of interest. In addition to civilian and military applications, these systems are also used in the case of natural disasters such as the Tsunami, or most recently the disastrous cyclone in Burma. Using the WTC 500 RO, up to 10,000 litres of palatable drinking water can be produced per day. The Vice Minister of Defence of the Sultanate of Brunei, Pehin Colonel Dato' Mohammad Yasmin Umar, assured himself once again of the systems at the KÃ„RCHER Futuretech stand and is considering making a purchase in the near future. "This exhibition was an excellent opportunity to establish new contacts and expand existing partnerships on the Asian market," states Dirk Waldow in his positive summary.

In addition, the Sales Manager also welcomed interested people from Eastern Europe who took the opportunity to make a closer, personal inspection of the KÃ„RCHER Futuretech portfolio. Lieutenant General Ivan Svyda, Commander-in-Chief of the Armed Forces of the Ukraine and the Polish Lieutenant General Lech Majewski, â€œAssistant Chief of General Staff," intensively discussed further equipment possibilities for their armies.

Fri, 27 Jun 08
Defence Services Asia: High-ranking Visitors from All over the World at the KÃ„RCHER Futuretech Stand
http://www.army-technology.com/contractors/nbc/karcher/press13.html
At the Defence Services Asia DSA in Kuala Lumpur, Malaysia, the largest exhibition in the Asian area, together with its Malaysian partners Corporate Envoy and Challenge Corporation, KÃ¤rcher Futuretech presented its systems for peace-keeping forces. At the 11th edition of this exhibition which took place for the first time in the Putra World Trade Center (PWTC) in the centre of Kuala Lumpur, KÃ„RCHER Futuretech Sales Manager Dirk Waldow, who is in charge of the Asian market, welcomed many high-ranking visitors and interested people from all over the world.

The Malaysian Vice Premier and Minister of Defence, Yab Dato' Sri Mohd Najib Abdul Razak, appeared very impressed with the technology of the trailer-based catering systems. Already since the beginning of this year, the Malaysian Armed Forces have relied on the mobile TFL 25 field laundry. Major General Dato' Oseman Bin Chik, Chief of Logistics of the Royal Malaysian Armed Forces, thanked for the delivery of the first three compact laundry systems and took advantage of the DSA for discussing the final details of this contract with KÃ„RCHER Futuretech Sales Manager Dirk Waldow. The highly mobile water purification systems of the Waterclean series were once again in the focus of interest. In addition to civilian and military applications, these systems are also used in the case of natural disasters such as the Tsunami, or most recently the disastrous cyclone in Burma. Using the WTC 500 RO, up to 10,000 litres of palatable drinking water can be produced per day. The Vice Minister of Defence of the Sultanate of Brunei, Pehin Colonel Dato' Mohammad Yasmin Umar, assured himself once again of the systems at the KÃ„RCHER Futuretech stand and is considering making a purchase in the near future. "This exhibition was an excellent opportunity to establish new contacts and expand existing partnerships on the Asian market," states Dirk Waldow in his positive summary.

In addition, the Sales Manager also welcomed interested people from Eastern Europe who took the opportunity to make a closer, personal inspection of the KÃ„RCHER Futuretech portfolio. Lieutenant General Ivan Svyda, Commander-in-Chief of the Armed Forces of the Ukraine and the Polish Lieutenant General Lech Majewski, â€œAssistant Chief of General Staff," intensively discussed further equipment possibilities for their armies.

Fri, 27 Jun 08
Defence Services Asia: High-ranking Visitors from All over the World at the KÃ„RCHER Futuretech Stand
http://www.army-technology.com/contractors/field/karcher/press10.html
At the Defence Services Asia DSA in Kuala Lumpur, Malaysia, the largest exhibition in the Asian area, together with its Malaysian partners Corporate Envoy and Challenge Corporation, KÃ¤rcher Futuretech presented its systems for peace-keeping forces. At the 11th edition of this exhibition which took place for the first time in the Putra World Trade Center (PWTC) in the centre of Kuala Lumpur, KÃ„RCHER Futuretech Sales Manager Dirk Waldow, who is in charge of the Asian market, welcomed many high-ranking visitors and interested people from all over the world.

The Malaysian Vice Premier and Minister of Defence, Yab Dato' Sri Mohd Najib Abdul Razak, appeared very impressed with the technology of the trailer-based catering systems. Already since the beginning of this year, the Malaysian Armed Forces have relied on the mobile TFL 25 field laundry. Major General Dato' Oseman Bin Chik, Chief of Logistics of the Royal Malaysian Armed Forces, thanked for the delivery of the first three compact laundry systems and took advantage of the DSA for discussing the final details of this contract with KÃ„RCHER Futuretech Sales Manager Dirk Waldow. The highly mobile water purification systems of the Waterclean series were once again in the focus of interest. In addition to civilian and military applications, these systems are also used in the case of natural disasters such as the Tsunami, or most recently the disastrous cyclone in Burma. Using the WTC 500 RO, up to 10,000 litres of palatable drinking water can be produced per day. The Vice Minister of Defence of the Sultanate of Brunei, Pehin Colonel Dato' Mohammad Yasmin Umar, assured himself once again of the systems at the KÃ„RCHER Futuretech stand and is considering making a purchase in the near future. "This exhibition was an excellent opportunity to establish new contacts and expand existing partnerships on the Asian market," states Dirk Waldow in his positive summary.

In addition, the Sales Manager also welcomed interested people from Eastern Europe who took the opportunity to make a closer, personal inspection of the KÃ„RCHER Futuretech portfolio. Lieutenant General Ivan Svyda, Commander-in-Chief of the Armed Forces of the Ukraine and the Polish Lieutenant General Lech Majewski, â€œAssistant Chief of General Staff," intensively discussed further equipment possibilities for their armies.

Fri, 27 Jun 08
Defence Services Asia: High-ranking Visitors from All over the World at the KÃ„RCHER Futuretech Stand
http://www.army-technology.com/contractors/field/kaercher1/press15.html
At the Defence Services Asia DSA in Kuala Lumpur, Malaysia, the largest exhibition in the Asian area, together with its Malaysian partners Corporate Envoy and Challenge Corporation, KÃ¤rcher Futuretech presented its systems for peace-keeping forces. At the 11th edition of this exhibition which took place for the first time in the Putra World Trade Center (PWTC) in the centre of Kuala Lumpur, KÃ„RCHER Futuretech Sales Manager Dirk Waldow, who is in charge of the Asian market, welcomed many high-ranking visitors and interested people from all over the world.

The Malaysian Vice Premier and Minister of Defence, Yab Dato' Sri Mohd Najib Abdul Razak, appeared very impressed with the technology of the trailer-based catering systems. Already since the beginning of this year, the Malaysian Armed Forces have relied on the mobile TFL 25 field laundry. Major General Dato' Oseman Bin Chik, Chief of Logistics of the Royal Malaysian Armed Forces, thanked for the delivery of the first three compact laundry systems and took advantage of the DSA for discussing the final details of this contract with KÃ„RCHER Futuretech Sales Manager Dirk Waldow. The highly mobile water purification systems of the Waterclean series were once again in the focus of interest. In addition to civilian and military applications, these systems are also used in the case of natural disasters such as the Tsunami, or most recently the disastrous cyclone in Burma. Using the WTC 500 RO, up to 10,000 litres of palatable drinking water can be produced per day. The Vice Minister of Defence of the Sultanate of Brunei, Pehin Colonel Dato' Mohammad Yasmin Umar, assured himself once again of the systems at the KÃ„RCHER Futuretech stand and is considering making a purchase in the near future. "This exhibition was an excellent opportunity to establish new contacts and expand existing partnerships on the Asian market," states Dirk Waldow in his positive summary.

In addition, the Sales Manager also welcomed interested people from Eastern Europe who took the opportunity to make a closer, personal inspection of the KÃ„RCHER Futuretech portfolio. Lieutenant General Ivan Svyda, Commander-in-Chief of the Armed Forces of the Ukraine and the Polish Lieutenant General Lech Majewski, â€œAssistant Chief of General Staff," intensively discussed further equipment possibilities for their armies.

Fri, 27 Jun 08
Radiotechnika Marketing
http://www.army-technology.com/contractors/navigation/radiotechnika
Radiotechnika Marketing offers carefully chosen fibre-optic cable and wireless connectors to satisfy the requirements of our customers in various branches of the military.

Today, Radiotechnika continues the manufacturing tradition of Radiotechnika Co-operative, the oldest electronics company in WrocÅ‚aw and one of the oldest in Poland. At present, we employee more than 70 workers, most of whom are highly qualified professionals and have been employed with us for more than ten years. We rely and depend on their deep technical knowledge, interdisciplinary skills and ability to innovate to serve the market with effective, leading-edge technologies.

CTOS CONNECTORS

Radiotechnika assembles CTOS connectors, approved by the Polish Army, which offer a flawless mechanical interface and easy service. The lenses used within these connectors expand the light beam, which makes the entire solution more resistant to the stresses of the military environment. The stainless-steel shell delivers extraordinary robustness and durability.

Our tactical fibre-optic cables are produced based on the Amphenol CTOS connector technology. These are ideal transmission cables for the field, and can be installed in mobile C4I networks. These field deployable, high durability cables provide superior mechanical strength and high resistance to the harsh environment. Hermaphroditic CTOS connectors enable daisy-chain connections without installing any additional adapters at the beginning or end of the jumper.

We design and manufacture media converters which allow transmission of various types of electrical signals via fibre-optic links and then, at the end of the links, convert it back into the digital or analogue electrical signal.

CABLE AND WIRELESS INTERCONNECT TECHNOLOGY

Radiotechnika is a QPL-approved assembler of military connectors MIL-DTL-38999 series 1 and 3, as well as a qualified assembler of VG95234 series connectors. These series of connectors deliver the highest quality interconnect systems for the most demanding customers.

VEHICLE POWER-SUPPLY UNIT AND NBC DETECTION FILTERS

Our manageable vehicle power supply unit ZZP-24-17 is designed to be remotely managed and to deliver the 24V power supply to high-demand on-board electronics. NBC filters detect nuclear, biological and chemical contamination in military vehicles. When contamination is detected, the unit immediately switches the air flow through the filter to provide a safe environment for those in the vehicle.

WLAN-MOBILE 1 system provides wide-range wireless communication between vehicles. The system works with omni-directional and directional antennas within JEEE 802.11b in 1.6GHz, 2.1GHz and 2.4GHz frequency bands.

ISO, AQAP AND NATO CERTIFICATION

As a result of an audit conducted by the Military Institute for Quality Systems in January 2005, Radiotechnika was awarded with certificates that confirm our quality control system complies with the following norms: PN-EN ISO 9001:2001 (Cerificate No. 336/A/2005) and AQAP 2110:2003 (Certificate No336/A/2005)

In April 2005 Radiotechnika was registered by the Military Centre for Normalization and Coordination as a NATO Commercial and Government Entity (NCAGE CODE No.0897H) Radiotechnika is also licensed to manufacture and trade products and technologies of military and police origin and destination (Certificate No.B-055/2005).

DISTRIBUTION AND REPRESENTATION

Radiotechnika started its distribution activity with electronic components and measurement equipment like oscilloscopes and gas analysers. However, the constant growth and development of the company has meant that the number of companies which have officially appointed us as their regional representative and value added distributor has grown steadily every year.

Our main task is to offer the highest-quality components and appliances. We offer a very broad range to satisfy the most demanding customers and to supply a complete assortment of products. The companies we represent or cooperate with are the leaders in their markets and supply the highest quality products.

R&D ENGINEERS

The development department is able to serve various market segments. It is comprised of a dynamic and experienced team of highly knowledgeable engineers willing and able to translate customersâ€™ ideas into effective technical solutions, by applying the latest technologies.

Fri, 27 Jun 08
Carlo Gavazzi Computing Solutions
http://www.army-technology.com/contractors/computers/carlo-gavazzi
Since 1971 Carlo Gavazzi Computing Solutions has supplied system-level hardware for military applications. Our leadership in open architecture bus structures and our expertise in military specifications have allowed us to provide packaging and systems that meet the stringent needs of this marketplace.

COTS AND CUSTOM-EMBEDDED COMPUTING SYSTEMS

Carlo Gavazzi Computing Solutions has been a major supplier of COTS and custom products that have allowed state-of-the-art embedded computing systems and components to be fielded in the most critical military applications, including those requiring red/black TEMPEST compartments or conduction cooling. Our expertise has allowed us to package COTS components and board-level products for systems that are required to pass numerous military shock and vibration specifications, including navy Mil-S-901D (lightweight and medium weight hammer as well as heavyweight barge testing), Mil-S-167, Mil-S-461, and Mil-S-810.

From military laptop expansion to the latest cooling technologies, Carlo Gavazzi Computing Solutions continues to maintain its leadership and commitment to our national defense and homeland security. Carlo Gavazzi Computing Solutions develops standard products and specializes in the customizing of these products to provide solutions that are tailored to our customers' specific application requirements. These include:

10 to 25 year product life support

Full integration capabilities

COTS technologies to the warfighter in all environments

Open architecture standards and products

The cost effective design and production of modified standard and custom products for all environments

Carlo Gavazzi products have a variety of applications across the defence insustry. These include:

C4ISR

Avionics

Mobile systems

Secure communications - TEMPEST chassis and systems

Rugged servers

Mil laptop expansion

Sonar

XP-SR RUGGED PCI EXPANSION SYSTEM

Carlo Gavazzi&squo;s XP-SR series of rugged PCI expansion chasses are designed to fulfill critical military applications, such as connecting to a rugged laptop for use on an aircraft carrier&squo;s runway.

The XP-SR consists of a PCI host card and a 2U rackmount chassis made of 0.125 gauge aluminum that houses two or three PCI slots. A second chassis can be added for a total of four or six slots from a single host slot. The chassis connects to the host using two shielded CAT5 cables with RJ-45 connectors. The host and expansion unit can be placed 5m apart. Compliant with PCI 2.2 specifications, the XP2-SR (two-slot chassis) supports 3.3V and universal voltage PCI cards. The XP3-SR (three-slot chassis) supports 5V and universal voltage PCI cards. The chassis is cooled with recirculation fans.

Ideal for mission critical applications, the XP-SR series is designed to meet the shock, vibration, and emission standards (MIL-STD-901D, MIL-STD-167, and MIL-STD-461) required by the military. Features include:

Adds two or three PCI expansion slots

PCI 2.1/2.2 compliant

Available in 2U rackmount chassis made of .125 gauge aluminum

Compatible with 64-bit/66 MHz (two slot) and 32-bit/33 MHz (three slot) bus speed

Available with front configurable I/O

Designed to meet MIL-STD-901D, MIL-STD-167, and MIL-STD-461 (Shock, Vibration, Emmissions)

Conforms to international emission and immunity standards

Compatible with SPARC Solaris, Solaris x86, WindowsTM 2000, WindowsTM XP, and Linux

714 SERIES CONVECTION-COOLED ATR ENCLOSURES

Carlo Gavazzi Computing Solutions&squo; 714 series convection-cooled ATR enclosures offer a wide range of COTS solutions from an innovative, high strength modular frame. Designed for maximum strength and light weight deployment, the frame and construction of the 714 Series models the fabrication techniques used in manufacturing today&squo;s commercial and military aircraft. Utilizing an aluminum frame that provides flexibility in size, the frame is assembled with solid rivet technology and reinforced with aluminum outer panels to form a rugged ATR that can withstand the most severe shock and vibration environments. Features include:

Aircraft frame construction

Lightweight deployment

Expansive range of ARINC sizes

Easily configurable for custom sizes

Modular power supply

AC or DC filtered inputs

High altitude fan offering

System performance monitoring

Multiple bus architectures

Cold start heaters

Avionics isolation Tray

Configurable I/O panel

Fri, 27 Jun 08
SJH Projects
http://www.army-technology.com/contractors/protection/sjh
SJH Projects provide consultancy, testing and a range of products to protect against the effects of blasts. Projects have been undertaken in counter-terrorism, landmine and IED protection and the storage and transportation of munitions. Other more specialist blast protection applications have also been dealt with for customer-specific requirements.

XPT BLAST PROTECTION MATERIAL

SJH Projects has its own blast mitigation material - XPT. This is used in a number of the company&squo;s products such as the Mailsafe and Detsafe ranges. It is comprised of sacrificial bonded material that absorbs a large amount of kinetic energy when broken up in blast waves. XPT can also be used as part of a system to protect vehicles from underside blasts such as landmines or roadside bombs.

DETONATOR TRANSPORTATION CONTAINERS

The movement or storage of detonators can create logistical hurdles and added expense. SJH Projects detonator containers are designed to reduce the hazard classification of transporting detonators down to the same level as small-arms rounds. This provides much greater flexibility and safety for all those who have to work with or around such items. Certification to 1.4S is the responsibility of national Competent Authorities and is detonator specific. SJH Projects can assist with the certification process.

SJH Projects can produce a variety of configurations using standard and modified ammunition boxes. In the event of a detonator firing, the XPT chambers inhibit propagation and insulate the detonators from heat ‐ essential for transportation approval and protection in a road traffic accident with its inherent risk of fire.

FUELSAFE PROTECTIVE JERRYCANS

Long distance operations in the field often require additional supplies of fuel. The jerrycan is the age old tool for this job, but if such operations are in a hazardous environment the transportation of unprotected fuel on vehicle roof racks is an unnecessary risk. Tested with hand grenades, the Fuelsafe protective jerrycan protects both petrol and diesel from close range explosive devices.

VEHICLE MINE AND IED PROTECTION

Because of the way in which XPT blast protective material absorbs blast and dampens accelerations and the through transmission of energy, it is ideal for use on the underside of vehicles. It can be used to enhance the protection of armoured vehicles or to provide landmine protection to soft skinned vehicles. For soft skinned vehicles the stiffness of the body has to be upgraded, which is best achieved through the use of a roll cage. SJH Projects can work with each customer to make sure that all the factors that affect survivability are addressed, so that the XPT-based system becomes part of a viable protection system.

BUILDING BLAST PROTECTION PANELS

XPT blast mitigation panels can be used as an effective blast cladding system. Ideal for mail screening rooms and explosive storage and processing facilities, they are simple to erect and remove at a later date if required. One of the key benefits of XPT panels is that they absorb a high proportion of the blast. This greatly reduces the damaging effects that take place when reflected blast waves interact.

When conditions dictate, the XPT system is further enhanced with ballistic fibre reinforced composite panels. Extensive experience in the use of such composites ensures that the result will be most efficient and cost-effective.

Thu, 26 Jun 08
SJH Projects
http://www.army-technology.com/contractors/explosives/sjh
SJH Projects provide consultancy, testing and a range of products to protect against the effects of blasts. Projects have been undertaken in counter-terrorism, landmine and IED protection and the storage and transportation of munitions. Other more specialist blast protection applications have also been dealt with for customer-specific requirements.

XPT BLAST PROTECTION MATERIAL

SJH Projects has its own blast mitigation materials, XPT. This is used in a number of the company&squo;s products such as the Mailsafe and Detsafe ranges. It is comprised of sacrificial bonded material that absorbs a large amount of kinetic energy when broken up in blast waves. XPT can also be used as part of a system to protect vehicles from underside blasts such as landmines or roadside bombs.

DETONATOR TRANSPORTATION CONTAINERS

The movement or storage of detonators can create logistical hurdles and added expense. SJH Projects detonator containers are designed to reduce the hazard classification of transporting detonators down to the same level as small-arms rounds. This provides much greater flexibility and safety for all those who have to work with or around such items. Certification to 1.4S is the responsibility of national Competent Authorities and is detonator specific. SJH Projects can assist with the certification process.

SJH Projects can produce a variety of configurations using standard and modified ammunition boxes. In the event of a detonator firing, the XPT chambers inhibit propagation and insulate the detonators from heat ‐ essential for transportation approval and protection in a road traffic accident with its inherent risk of fire.

FUELSAFE PROTECTIVE JERRYCANS

Long distance operations in the field often require additional supplies of fuel. The jerrycan is the age old tool for this job, but if such operations are in a hazardous environment the transportation of unprotected fuel on vehicle roof racks is an unnecessary risk. Tested with hand grenades, the Fuelsafe protective jerrycan protects both petrol and diesel from close range explosive devices.

VEHICLE MINE AND IED PROTECTION

Because of the way in which XPT blast protective material absorbs blast and dampens accelerations and the through transmission of energy, it is ideal for use on the underside of vehicles. It can be used to enhance the protection of armoured vehicles or to provide landmine protection to soft skinned vehicles. For soft skinned vehicles the stiffness of the body has to be upgraded, which is best achieved through the use of a roll cage. SJH Projects can work with each customer to make sure that all the factors that affect survivability are addressed, so that the XPT-based system becomes part of a viable protection system.

BUILDING BLAST PROTECTION PANELS

XPT blast mitigation panels can be used as an effective blast cladding system. Ideal for mail screening rooms and explosive storage and processing facilities, they are simple to erect and remove at a later date if required. One of the key benefits of XPT panels is that they absorb a high proportion of the blast. This greatly reduces the damaging effects that take place when reflected blast waves interact.

When conditions dictate, the XPT system is further enhanced with ballistic fibre reinforced composite panels. Extensive experience in the use of such composites ensures that the result will be most efficient and cost-effective.

Thu, 26 Jun 08
Instytut Przemyslu Organicznego
http://www.army-technology.com/contractors/explosives/instytut
The Institute of Industrial Organic Chemistry (IPO) is a leading research and development centre with more than 60 years worth of experience in various fields of chemical research. One of the IPO's many fields of research is concerned with national defense issues, such as the study of physicochemical and explosive properties of high-energetic materials including: brisant explosives, powders and solid rocket propellants, pyrotechnic mixtures, shaped charges and blasting agents. HIGH-ENERGETIC MATERIALS RESEARCHES IPO conducts research into a number of high-energetic materials. Research fields include:

Research on physicochemical and explosive properties of high-energetic materials Synthesis of new explosives Elaboration of new usable forms based on brisant, propellant and pyrotechnic explosives Ballistic research on powders, propellant elements and pyrotechnic products Research on pyrotechnic mixtures Research on modificators of combustion of propellants Elaboration of solid rocket propellants technology Research on characteristics of blast-waves generated by explosions Research on gas detonations and consequences of spatial explosions Researching, designing and producing of devices and constructions limiting explosion consequences

HIGH-ENERGETIC MATERIALS TESTING IPO also conducts research into explosives and blasting agents such as military-grade and industrial explosives. Research fields include:

Tests of explosive properties of high-energetic materials such as: sensitivity to different kinds of stimuli, detonation characteristics, ballistic properties Tests of physicochemical properties of high energetic materials Tests by use: electric and non-electric detonators (including comparisons), special igniter shaped charges and linear-shaped charges (using for steel cutting) Modeling of computer simulations regarding the performance of shaped charges

SAFETY HAZARD RESEARCH AND EVALUATION IPO is certified to research and evaluate safety hazards regarding manufactured high-energetic materials and substances with potentially explosive properties (including ammonium nitrate) and also performs investigations concerning the safe transportation of dangerous materials. IPO issues certifications and accreditations according to RID and ADR regulations, and is also a key participant in UN Expert Committee for Transport research projects. CERTIFICATES IPO's investigations into high-energetic materials are conducted under stringent laboratory conditions in accordance with relevant military and civilian standards. IPO is accredited to ISO 9001 standards and meets competences with PN-EN ISO/IEC 17025:2005, confirmed by the Polish Centre for Testing (Certificate PCA No AB 374) and AQAP 2110.

Thu, 26 Jun 08
Comrod
http://www.army-technology.com/contractors/antennas/comrod
Comrod is a Norwegian antenna manufacturer located at Tau, close to Stavanger. It designs, manufactures and distributes marine and military HF antennas, VHF antennas, UHF antennas, combined VHF-GPS antennas, military masts, military power supplies, and battery chargers.

MILITARY ANTENNAS

The company has built up an integrated organisation, including development, construction, production, sales and marketing of the company's own product range. The present technology and product status has been built up over a period of more than 50 years of experience.

As a result of active and commercially focused strategic planning combined with own product development, Comrod today appears as one of the world's leading producers of whip antennas. The business is based on two main market areas:

Marine whip antennas Light military masts and antennas

Our marine and military antennas are exported to more than 40 countries worldwide Approximately 85% of the total turnover is exported.

Through our ISO 9001-certified quality system and satisfied customers, our goal is to improve our position as an leading international company within the development, production and marketing of marine and light tactical antennas for defence use.

HF ANTENNAS

Antennas are available for use on manpack radios, and vehicle-mounted and shipboard applications. Broadband tactical vee antennas for medium to long range skywave communications at fixed locations are also produced.

VHF ANTENNAS

A comprehensive product range covers all requirements for handheld manpack, vehicle, shipboard and static applications. Most antennas offer full broadband operation over the full VHF spectrum. High gain static antennas are also available.

COMBINED VHF-GPS ANTENNAS

The VHF-GPS antennas are based on our vehicle-born VHF antennas, but with a built-in military specification GPS active receiving antenna. Instead of using separate GPS and VHF communication antennas, the VHF-GPS will give you both with one base. This simplifies the installation and consequently reduces costs.

The GPS antennas will not be affected by the use of full transmitting power on VHF.

UHF ANTENNAS

Our UHF range covers monopoles and discones in the ground-air frequency spectrum, in addition to the high-gain narrow beamwidth antennas for multi-channel trunk links.

TELESCOPIC AND SECTIONAL TACTICAL MASTS

Our product range includes extensive selections from infantry manpack masts to full automated masts. These masts are designed to support light HF, VHF and UHF communication antennas, heavy EW antennas, LOS systems, cameras, and radars, providing full safety to operators as well as high pointing accuracy. All masts sections are made of fibreglass or carbon fibre composite. LERC also designs masts according to customers' specifications. POWER SUPPLIES AND BATTERY CHARGERS The power division develops and manufactures power supplies and battery chargers for demanding military applications. The product line ranges from small power supplies integrated in the customer's system, to complex systems with supervision, and battery chargers for lead acid and Li-Ion batteries.

The products are designed with a focus on high EMC and EMP immunity, low noise-emission, high efficiency, ruggedness and high reliability. The standard power supplies and battery chargers have universal input voltage and power-factor correction for optimum adaptation to weak power sources (such as portable generator sets).

In addition to the standard products, the power division develops and manufactures power supplies and battery chargers according to specifications from customers. All current products utilise soft switching topologies, providing higher efficiency, lower cost and more compact products.

Thu, 26 Jun 08
Ford F-Series
http://www.army-technology.com/projects/fordpickuptruck/
The Ford pick-up truck has to be one of the most well-known tough-duty vehicles in the commercial arena. However the same design has also made an impression on the military market.

In early 2000 Ford produced a concept truck for the US Army based on their popular F-350 super duty crew cab. The design was structurally modified and equipped with advanced drive train, suspension, electrical and electronic components and was able to pass a series of desert field trials.

"The Ford pick-up truck has to be one of the most well-known tough-duty vehicles in the commercial arena."

This development was part of the US Army's COMBATT (commercially based tactical truck) programme, which aimed to use modified commercial trucks for military use to replace ageing vehicle fleets at low cost. In March 2008 the Iraqi Police purchased 2,600 vehicles including 300 Ford F-350 super duty pick-up trucks to strengthen its patrol vehicle fleet in the provinces.

F-350 SUPER DUTY

The F-350 super duty COMBATT was structurally modified to a gross vehicle weight of 12,700lb.

The design included enhanced axle differentials, upgraded suspension, electronically controlled high performance shock absorbers, additional air springs, a central tyre inflation system and also military specification 37in tyres with a run-flat system. The truck was also equipped with protective armour on the underside as a safeguard measure for rough terrain.

In addition there was an onboard computer with an advanced global positioning satellite navigation system, night-vision system, collision warning system, and an upgraded military electrical system providing 12V, 24V and 110V AC power. The truck was also designed to ford 30in-deep water and also to operate in temperatures from -50Â°F up to 120Â°F.

An additional development version of the F-350 is being designed as a lightweight vehicle that is more fuel efficient under the IMPACT (improved materials and powertrain architectures for 21st century trucks) programme.

The usual power unit for the F-350 in military use is the six-litre power stroke V8 diesel (350hp) with a five-speed 5R110W automatic or six-speed manual gear box and 4Ã—4 transmission (width 80in). The F-350 has a variety of chassis lengths from 137in standard to 158in extended cab. Fuel tank capacity can be from 29gal to 38gal depending upon the body configuration.

ARMOURED F-350

The ULTRA AP is a specially armoured majorly modified Ford F-350 pick-up truck (larger than the HumVee). The roadside bomb problem in Iraq and Afghanistan has required a move toward armoured vehicles even for light patrol operations.

"In March 2008 the Iraqi Police purchased 2,600 vehicles including 300 Ford F-350 super duty pick-up trucks."

The ULTRA AP (armoured patrol) uses lightweight armour, bullet and blastproof glass and a new armoured car-like concept body on the F-350 chassis and changing the seating arrangements so that passengers do not sit over the wheels (passengers face out all around the vehicle to watch for threats). The vehicle is also heavily armoured under the chassis and can deflect mine and bomb blasts away from the passenger compartment (blast bucket), which also acts as a roll cage.

The development has been less expensive than purpose-designed vehicles and has been shown to be very effective (under test by the Office of Naval Research). The Afghan Army has had the presence of mind to put in an order for 5,000 modified F-350s for patrols across rough terrain. Another similar armoured car design based on the F-350 chassis is the Sand Cat (developed by Plasan in Israel).

Sat, 21 Jun 08
Data Device Corporation (DDC) Introduces New -55 to +125 Degree C Temperature Grade RD-19240FS-100 Resolver Converter!
http://www.army-technology.com/contractors/electronic/data_device/press23.html
Data Device Corporation (DDC) announces the release of a -55 to +125 degree C temperature grade RD-19240 resolver converter. The new RD-19240FS-100 resolver-to-digital converter is highly repeatable to 1 LSB in 14-bit mode and contains programmable features such as resolution, bandwidth, and tracking rate, which allow for best dynamic configurability.

A built-in-test output additionally monitors for loss of signal, reference frequency, or tracking. "This new temperature option opens up many new design possibilities for applications requiring a wide temperature range and up to 14 bit resolution," stated DDC's Senior Product Marketing Specialist, Roger Tomassi. Package type is a small 10mm x 10mm MQFP.

Data Device Corporation (DDC) is recognized as a leading international supplier of high-reliability motion control, solid-state power controllers, and data interface products for military and industrial applications for over 40 years.

DDC's broad product line consists of Synchro/Resolver interface components, solid-state power controllers, MIL-STD-1553 and ARINC 429 data bus boards and components, and advanced data bus technology for high-speed Ethernet and Fibre Channel networks.

Sat, 21 Jun 08
Vectronix breeds Miniature Night Vision Monocular
http://www.army-technology.com/contractors/surveillance/leica/press7.html
With over 50,000 BIG/BIM image intensified night vision devices in operation, Vectronix decided to make its next product significantly lighter and smaller than existing MIL-spec goggles and monoculars, without sacrificing quality or performance. This objective was reached using miniaturized components and a revolutionary 16 mm image intensifier tube. TARSIUS16 is the name of the new Miniature Night Vision Monocular which weighs 30% to 45% less than comparable devices using 18mm tubes.

Even in its basic configuration, TARSIUS16 offers several extremely useful features. Automatic adjustment for varying levels of ambient light (auto-gating) and manual gain control ensure longer tube life and optimal scene rendering. The ergonomic design reduces the training effort and allows intuitive operation.

The infrared illuminator enables movement and working in total darkness. It responds instantaneously to the user, and unlike other night vision systems, TARSIUS16 ensures 100% situational awareness by eliminating the moment of darkness as the IR illuminator is activated. An indicator alerts the operator when the IR illuminator is active to prevent his being detectable by accident.

Three types of batteries can be used, all of them standard types that are commercially available. The 3 V lithium battery CR123A lasts for 55 hours of operation. Alternatively, an AA size 1.5 V alkaline or a 1.2 V NiMH will fit. A low battery indicator is projected into the field of view so that the user is never caught unaware.

A 3x magnification lens can easily be clamped in front of the objective to increase the observation and surveillance range.

With its Smart Mount, TARSIUS16 can be configured specifically for the user's mission. The transition from single to dual mount, and from handheld to face mask, helmet or other system is quick and does not require any special tools. The Smart Mount permits individual adjustments for a comfortable, secure fit. Stable mounting plus minimum size and weight enhance the operator's agility and effectiveness.

Sat, 21 Jun 08
Beta Transformer Technology Corporation Achieves AS9100 Registration
http://www.army-technology.com/contractors/electronic/data_device/press24.html
Beta Transformer Technology Corporation, the leader in Military and High Reliability Aerospace Magnetics has achieved AS9100 registration. Beta Transformer now joins other top tier aerospace suppliers in demonstrating its commitment to delivering high quality products that meet or exceed its customers' expectations.Beta Transformer's was granted AS9100:2004-01 registration by Underwriters Laboratories on May 30, 2008.

Sat, 21 Jun 08
Red Box partnership with Flyer-Truck Ground Handling System
http://www.army-technology.com/contractors/surveillance/red_box/press3.html
Red Box International, the Hampshire-based Ground Power Unit (GPU) manufacturer has entered into a formal partnership agreement to market the highly successful Flyer-Truck range of ground handling systems in the UK. The German-made Flyer-Truck range currently comprises 12 self-powered units capable of moving private and business aircraft from the smallest single seater up to a take-off weight of 20 tonnes. Suitable for both fixed and rotary winged aircraft, the units have landing gear brackets to suit virtually every aeroplane, including historic models. Recently introduced models at the top of the range have taken Flyer-Truck into the commercial sector.

"This is an ideal partnership for both companies," claims Red Box Marketing Director Adrian Jackson. "We are essentially selling to identical markets, and our products complement each other perfectly. As agents for Flyer-Truck, we shall be able to provide in-depth aftersales service to customers throughout the UK."

Under the reciprocal agreement, Maschinenbau Zaglauer, the makers of Flyer-Truck, will market and support Red Box products in Germany. They will also be incorporating Red Box ground power units as integral parts of some of their vehicles.

Flyer-Truck have been looking for an appropriate UK partner for some time and the two companies have been in regular contact since being introduced at Aero Friedrichshafen in 2007. The contract was signed during the course of the recent AeroExpo London.

Flyer-Truck's Managing Director Werner Zaglauer sees the partnership with Red Box International as a huge step forward for his company also with regards to the overseas presence. â€œWe are very pleased that we could win Red Box as our UK representative and combine the strengths of two strong market-leading partners,â€ he said.

Red Box International has a range of portable Ground Power Units suitable for almost all aircraft. They also manufacture Continuous Power Supplies, high current Transformer Rectifier Units and Frequency Converters.

Thu, 19 Jun 08
ELKAT
http://www.army-technology.com/contractors/jamming/elkat
ELKAT is a leading Israel integrator and distributor of sophisticated electronic equipment for the security field. We also offer protection solutions for organizations and for private customers. ELKAT provides several different types of jammer system, including:

Mobile / stationery jammers Cellular / broadband jammers and RF jammers All-band frequency jammers

CELLULAR PHONE JAMMERS

Elkat offers cellular phone jammers, which are designed to prevent cellular phone communication in designated areas. Based on advanced cellular phone jamming technology, the cellular phone jammer transmits an RF signal which blocks the communication between the cellular phone and the nearest cellular phone antenna, actively jamming cellular phone frequencies. This denies service to cellular phone users within a specified blocking range.

BROADBAND RF JAMMERS Our broadband RF jammer is based on sophisticated jamming technology. By accurately jamming the remote control frequencies, it cuts off radio communications from the triggering transmitter to the receiver on the bomb, thus immediately preventing bomb detonation and protecting nearby civilians, bomb-squad team members or military convoys.

Delivering powerful jamming signals through a matching array of broadband antennas, the jammer installed in a vehicle creates a secure 'bubble' area around the jamming carrier vehicle, thereby preventing bomb detonation in the convoy's route and saving passenger's life.

VIP-PROTECTION, INVESTIGATION AND SURVEILLANCE EQUIPMENT ELKAT's services and products cover all areas of security, from consulting to VIP-protection; and from quality investigation equipment to highly advanced electronic surveillance systems. Our products are sold to top security companies around the world. ELKAT has the ability to provide jammers for many emergency and security solutions, including threat assessment and gap analysis, plans and procedures, crisis management, emergency operations centers, security planning and design, training and exercises, and VIP protection courses and training. ELKAT also has the ability to provide different non-secret, concealed and hidden products and solutions, including:

Monitoring systems Jammers Encryption Facility and personal protection Search and Rescue Voice lie-detector Detectors and deactivators Information defence / offence Audio equipment Video equipment and cameras

ENCRYPTION, TAPPING, SURVEILLANCE AND EXPLOSIVES / DRUGS DETECTION EQUIPMENT ELKAT works in cooperation with leading global enterprises in order to develop and provide first-class solutions of encryption, tapping, jamming, surveillance and explosives and drugs detection. With more then 20 years of experience in the security protection field, we have the needed experience, know-how and perception to answer the demands of any client. We understand the complexity and sensitivity of the field and guarantee top-level service to our business clients. Companies, business people and other institutions that are looking for confident protection against unsolicited infiltrations and sabotage of their enterprises will find that ELKAT is the perfect business partner, who will listen, advise and find suitable solutions to reduce risks and losses, discover frauds, and eliminate threats.

Thu, 19 Jun 08
B&W International
http://www.army-technology.com/contractors/transport/b-and-w
Traditionally, high-end equipment has always come at high-end prices: if a buyer wants the best, they should be prepared to pay for the best. In recent years, however, prices have become more standardized, meaning that two items of similar cost can vary radically in terms of quality.

B&W is Germany&squo;s leading manufacturer of ruggedized outdoor cases. Combining the reputation and assured quality inherent in German production with the cost efficiency of outsourced manufacturing, B&W offers the very best quality of ruggedized outdoor cases on the market at an affordable price.

B&W cases are manufactured in facilities in non-EU member countries, meaning that production overheads are minimized. To ensure quality, however, each case undergoes stringent quality assurance in Germany before it goes on the market. RUGGEDIZED OUTDOOR CASES

B&W outdoor cases international are developed to withstand the toughest outdoor conditions and are subsequently tested under extreme conditions. B&W cases are designed to withstand extreme temperatures ranging from -40Â°C to +80Â°C. The cases are completely water tight, dust tight and air tight, meaning that they can be deployed in the harshest of outdoor environments without any risk to their contents.

B&W cases are also crack-proof, having been tested to a drop-height of 2m to a concrete floor, and are ultimately indestructible. This makes B&W cases ideal for situations which require a high degree of tough handling and abuse.

B&W ruggedized outdoor cases are equipped with sturdy eyes for padlocks and an air pressure compensation valve which ensures that contents are kept in a safe, airtight environment. The cases are available in orange and black, and feature individualized interior outfits (the standard outfit is empty). The interior can be outfitted with a foamed material insert that consists of flame retardant pre-punched cubic elements, a variable compartment division made of padded fabric and a carrier strap. All B&W containers are completely stackable for ease-of-storage.

All of these factors have established B&W cases&squo; reputation in the defense industry, where the need for rugged, reliable and cost-effective containers is paramount. B&W cases can be used to keep sensitive or delicate equipment safe in the most unforgiving or abusive environments. Through its production methods and stringent quality assurance testing, B&W has consolidated its reputation for providing the best quality outdoor cases on the market at the most competitive prices.

Thu, 19 Jun 08
Elite Ventures
http://www.army-technology.com/contractors/field/elite-ventures
Elite Ventures specializes in fabricating accommodation units for military and civilian camps through the manufacturing of ISO-certified steel containers, flat-pack prefabricated containers and trailer caravans; all standardized to 20ft and 40ft in size. Elite offer a variety of units such as sleeping units, kitchens, storage, showers, toilets, offices and recreation units, all built in 20ft or 40ft standard containers. Developing and realizing complex projects is done easily, due to our past experience with many international clients that we have dealt with.

ISO STEEL ACCOMMODATION CONTAINERS

Elite Ventures supply all types of ISO steel containers in all sizes, the most common of which are the 20ft and 40ft containers. These containers can be either brand new, or five-to-ten years old but still in excellent condition. Elite offer an unparralelled level of design flexibility and can accommodate any suggestions or special requirements a client might have. The containers usually come fully-furnished, containing all the furniture for the specified unit, with AC, water-heaters and more, depending on the unit type.

Some of the units Elite Ventures produce include:

Sleeping units

Office units

Kitchen and dining units

Medical and lab units

Recreaction, entertainment and gym units

Sanitary units

Laundry units

Garage and storage units

Guard station units

This is by no means a definitive list, and Elite Ventures are always open to any suggestions regarding different types or combinations of units in a single container.

ISO STEEL AND FLAT PACK ACCOMMODATION CONTAINERS

Construction camps, civilian and military housing needs, and industrial facilities are just some of the areas where flat pack accommodation containers may prove useful and cost effective. Modular buildings are an ideal solution in remote or rural areas, especially in situations where construction may prove inconvenient or even impossible.

The main advantages of flat packs are that they are relatively cheap, fast to assemble, and durable. One of their negative aspects, however, is that they have a limited lifespan of two or three years if looked after. ISO steel containers, on the other hand, can survive for up to ten years if properly maintained. Flat packs require labour to assemble them, whereas ISO steel container accommodations come ready-made. In addition, flat pack accommodation buildings are limited to only two stories in height, whilst, ISO steel container accommodations allow for up to seven stories.

TRAILER CARAVANS

House-trailers and mobile homes are accommodations that are usually manufactured off-site in factories. These types of accommodations usually consist of very strong trailer frames, axles, wheels and tow-hitches. Due to the fact that house-trailers are on wheels they have the advantage that they can be relocated at any time with no hassle. Most measure 30ft in length.

BESPOKE FIELD ACCOMODATION SOLUTIONS

All Elite Venture products are produced in the company&squo;s own warehouses, with stringent attention being paid to client requests and specifications. This helps the company accommodate a client&squo;s every specific material requirements, as offering the customer high quality bespoke products is of paramount importance to Elite. To ensure high quality, all materials are carefully sourced from the finest suppliers in the UAE and Europe. In addition, Elite&squo;s manufacturing facilities are designed to take into account any sudden raise in production capacity in case a client requires to rapidly setup a camp. Subsequently, the reliability, mobility and fast deployment of equipment is of paramount importance to Elite Ventures.

Elite Ventures constantly strives to develop mutually rewarding relationships with all of its customers, conduct operations to the highest ethical and professional standards, and aims to achieve and often exceed in fulfilling the expectations of both current and prospective clients.

Wed, 18 Jun 08
Phantom Technologies Launches New Generation of Smart Cellular Jammers
http://www.army-technology.com/contractors/jamming/phantom/press2.html
Phantom Technologies LTD has launched a new generation of Smart Cellular Jammers. Our new SMJ1890 has been designed for blocking all kinds of cellular standards in the world. Using state-of-art technology for maximum performance SMJ1890 has been designed with the capabilities of jamming specific channels inside the cellular networks bands.

The unit is controlled by Microprocessor for PLL & DDS programming and jamming of downlink and uplink is possible in the same time.

SMJ1890 is based on DDS technology provides extra high rate channel sweeping.

The user can control output power of each band by programmable attenuator. Output power can be varied from 5W up to 100W within 1dB steps.

Our SMJ1890 will provide you with the most efficient and flexible jamming abilities! System main features include:

Extra high rate channels sweeping Easy to use programming interface High VSWR protection Built-in filter for minimum RF interference outside the jamming bands Up to three jamming bands inside the 19In rack

The jammers are ideal for use in high-security environments, including prisons, military facilities, police facilities and governmental facilities.

Wed, 18 Jun 08
Aimpoint AB
http://www.army-technology.com/contractors/machine_guns/aimpoint
Aimpoint AB is a supplier of Electro-optical Sighting Systems including passive red dot collimator sight, laser device and mounts.

RED DOT SIGHT, IR LASER AIMING DEVICE, MOUNTING SOLUTIONS

Aimpoint AB supplies red dot sights, IR laser devices and mounts for hunting, sport shooting, police and military applications. The company strengthened its position as market leader when it was awarded the first multi-year contract ever for red dot sights by the US Army in 1997. Since then, Aimpoint has continued to deliver large quantities of sights to the US Army, French Army, US Airforce, US SOCOM, Swedish Army, Danish Army and Italian Army.

Through this, the company has proven its capability to manufacture and supply large quantities of first class equipment. The Aimpoint sight is also currently in use with Special Forces all over the world and regarded as the standard optical sight in most NATO countries. Aimpoint Sweden AB's manufacturing facility in Sweden is one of the first companies certified according to the new standard SS-EN ISO 9001:2000

COMPM3 AND COMPML3 - MOST ADVANCED RED DOT SIGHTS FOR SMALL CALIBRE WEAPONS

The new Advanced Circuit Effectiveness Technology (ACET) is a breakthrough in technology and has been implemented in a new series of sights. The new sights are called Aimpoint CompM3 and Aimpoint CompML3 and have several improvements in comparison to present sights. ACET combines Aimpoint's superior accuracy and ease of use with significantly lower power usage. ACET sights can last nearly 50,000 hours (on setting 7 out of 10) on a single DL1/3N battery. That is 49,000 hours more than other competitive sights on the same setting.

The new sights are even more rugged than the previous generation and with the new ACET technology follows the possibility to choose from two fixed sizes of the red dot - four Minutes Of an Angle (MOA) or two MOA. They also come with a rubber cover that makes these sights extremely sustainable to severe environment. Both sights are submersible down to an impressive 135ft (45m).

Aimpoint AB supplies the CompM3 and CompML2 sights and mounting systems for a wide range of small-calibre weapons such as pistols, sub-machine guns and assault rifles. The sights are non-magnifying, parallax free and allow for unlimited eye relief, which makes them suitable for close combat applications. Further, it allows for operation under all light conditions. The CompM3 is compatible with all NVD.

COMPM2 AND COMPML2 - RED DOT SIGHTS FOR SMALL CALIBRE WEAPONS

Aimpoint AB supplies the CompM2 and CompML2 sights and mounting systems for a wide range of small-calibre weapons such as pistols, sub-machine guns and assault rifles. The sights are non-magnifying, parallax free and allows for unlimited eye relief, which makes them suitable for close combat applications. Further, it allows for operation under all light conditions. The CompM2, also called M68 by the US Army is compatible with all NVD. The revolutionary CETechnology gives the sights an improved LED and an impressive battery lifetime of 10,000 hours of active use.

3XMAG - MAGNIFYING MODULE

The 3XMag is a magnifying module that provides maximum flexibility and increased performance in the field. Designed to be compatible with all Aimpoint sights, the 3XMag uses the red dot of the Aimpoint sight while offering the operator a greatly extended range. It also makes re-zeroing unnecessary which allows for quick and easy targeting at longer ranges. In addition to the magnifying attachment, Aimpoint has also developed a patented new mount called Aimpoint TwistMount. This allows the operator to switch from semi-sniping to close-quarter battle in a split second.

By using the sight and the 3X module, the same firearm can quickly be transformed to adapt to any situation. The result is increased confidence and performance.

The 3XMag has been combat tested in the Enduring Freedom campaign in Afghanistan.

MPS II - RED DOT SIGHT FOR HMG AND AGL

The AimpointÂ® MPS II is the second generation of passive collimated red dot sights suitable for medium or heavy-support weapons. MPS II is developed for military applications it is preferably used on vehicle mounted weapons.

The Aimpoint MPS II is a non-magnifying sight with unlimited eye relief allowing an unequalled speed of target acquisition. As requested by the user, the MPS II has been set with manually adjustable reticle brightness for all light conditions and with the new CETechnology. Thanks to its NVD compatibility, the MPS II now offers the possibility to be used 24 hours a day.

LPI - INFRA RED LASER POINTER

The AimpointÂ® LPI, IR Laser Aiming Device is an active aiming device or target designator for military and Law Enforcement applications in darkness or poor light conditions. The Aimpoint LPI is a complement to the passive aiming systems from Aimpoint. It is designed to fit directly on an Aimpoint red dot sight, which means that no special rail system is required. This is a truly unique tool, lightweight, small and sturdy. It enhances the red dot sight capability and meets the increasing demands on target lasers.

AIMPOINT COMPANY CULTURE

Aimpoint AB is the inventor of the red dot sighting technology. The Head office along with R&D, production, sales and marketing is located in Sweden. A subsidiary, located in Chantilly, Virginia, USA, handles sales and marketing on the US market and a sales office located in Hong Kong handles the Asian market.

Wed, 18 Jun 08
Sacil
http://www.army-technology.com/contractors/ammunition/sacil
Sacil Srl, founded in 1958, has always been actively involved in the field of welding-light structural work and sheet metal working. At the beginning of the 1980s, as a supplier for important defence sector companies, Sacil began to manufacture metal cans and containers for small and medium calibre ammunition. So, now, Sacil is able to offer a wide military product range.

Sacil has Acknowledgement Certificate no. 071, issued by the UNAVIACert, certifying that it meets the requirements established by UNI EN ISO 9001:2000. Our production is also quality assured with AQAP-2110.Â

AMMUNITION LINKS M27 FOR 5.56mm AND M28 FOR 25mm

Sacil mainly manufactures three types of ammunition links:

M27 for 5.56mm calibre ammunition

Links for 25mm calibre ammunition for KBA belt-ammo gun

M28 for 25mm calibre ammunition

AMMUNITION BOXES

Our ammunition cans are manufactured in galvanised steel, they are stackable and have drop down handles for easy handling. Each box is individually tested for air and water tightness and the covers are all removable and resealable for easy access and reuse. We meet all applicable customer specification.

M2A1 for small and medium calibre ammunition, it has dimension of 305.6mm x 154.8mm x 190.5mm

XM515/PA19 for small and medium calibre ammunition, it has dimension of 305.6mm x 154.8mm x 262.0mm

M548 for small and medium calibre ammunition, it has dimension of 470.0mm x 210.0mm 370.0mm

M19A1 for small and medium calibre ammunition, it has dimension of 279.4mm x 96.8mm x 184.2mm

CNU405/E for small and medium calibre ammunition, it has dimension of 471.0mm x 210.0mm x 370.0mm

BMI for hand grenade, it has dimension of 372.0mm x 155.0mm x 244.5mm

MILITARY CONTAINERS FOR VARIOUS CALIBRE AMMUNITION

Our military ammunition containers include light alloy containers for 76/62 cal. ammunition, in both single and twin-housing versions and containers for 40/70 cal. ammunition. For 120mm ammunition we can supply vanes and PA116L containers.

MILITARY ACCESSORIES AND CONTAINERS

Our military container and accessory range comprises:

Magazine for nÂ°30 shot 5.56mm x 45mm cal. ammunition.

Clips for 40/70 cal. ammunition

Container for 25mm cal. belt ammunition for KBA belt-ammo gun, available in metal and aluminium

Container for bombs type 81

Container for launch loads type 155 (various types)

Light alloy container for Mauser 30mm cal. belt ammunition

Truck-mountable caissons for storing and handling elements for aircraft landing runways (ZAE)

Plate kit for JDAM mk-83 bomb

Activation system for hand grenade MF2000

Pallets for transport of light alloy container for 76/62 cal. ammunition - single housing version

Metallic parts for runways

Tue, 17 Jun 08
Biral Wins Prestigious Contract from UK MoD
http://www.army-technology.com/contractors/nbc/biral/press2.html
Biral (Bristol Industrial & Research Associates Limited) has been awarded a contract by the UK Ministry of Defence following a competitive tender for the development of a technical demonstrator for the Portable Integrated Battlespace Biological Detection Technology (PIBBDT) project. The contract will build upon and extend research already undertaken by the MOD's scientific research centre at Dstl Porton Down towards the development of a compact and fully automated biological agent identification system.

Biral will lead a consortium of UK experts with a proven track record in the areas of collector technology, bio-detection and micro fluidics. Consortium members are Optisense, Stratophase, the University of Hertfordshire STRI (Scientific Technology Research Institute), and Dytecna who will provide advice and expertise on future in-service support considerations.

The technical demonstrator delivered at the end of the two-year project will reduce risk for the next generation of in-service equipment. The benefits are expected to include a quantum leap in technology from macroscale to microscale when compared with current in service capability.

The PIBBDT project represents a major opportunity to Biral and its partners in the development of the next generation of specific biological detection technology capability for the UK. PIBBDT will result in Biral being strategically well placed as a unique supplier of both real time generic and specific biodetection equipment.

Biral is a technology company specialising in the design, manufacture and supply of particle analysis, biodetection and meteorological instruments for science, industry and the environment. The company has particular expertise in optical characterisation of the atmosphere of which the detection of biological components is a major part for both military and civil applications. Biral is pleased to continue its working relationship with the CBRN IPT established on previous in service equipment programmes and now working towards the next generation of PIBBDT biodetection capability.

Tue, 17 Jun 08
3:10 to Yuma
http://www.army-technology.com/contractors/artillery/milfoam/press2.html
Milfoam International has been awarded a contract to provide their modern barrel cleaning solution to Yuma Proving Ground (YPG). Milfoam scores ten out of ten on the following three main benefits:

Its distinctive reduction in required manpower The high level cleaning result achieved consistently It's ease of use and portability

A UK company specialised in barrel cleaning solutions. Milfoam International products have also been supplied to the Finnish Defence Forces and many other end users worldwide.

Milfoam provides a complete barrel cleaning system for all kind of firearms. The system is based on a patented foam technology and NATO approved chemicals and lubricants for Artillery, Mechanized units, Infantry, Navy and Air Force.

US Army YPG selected and commended Milfoam's large calibre cleaning package for 105-155mm barrels, commenting: "This Cleaning package has reduced the initial required manpower by nearly 75%. Milfoam delivered its range of products for 25mm, 105mm, 120mm and 155mm guns in January 2008.

This sale has also highlighted the cooperation agreement between Milfoam International Limited in the UK and CLP Systems AB in Sweden. Joining forces and product lines has created an overall and complete barrel-cleaning portfolio ranging from field to arsenal maintenance. This collaboration allows customers to procure a bespoke cleaning package dependent on their requirements.

The Finnish Defence Forces have been using Milfoam cleaning equipment since 2005 and have found the 155mm artillery guns to be in much better condition.

Since 2006, the Canadian artillery has been using Milfoam Foam Cleaning technology in Afghanistan to keep their guns operational for longer periods.

Major weapon manufacturers such as BAE Systems are using the Heavy Barrel System for cleaning new gun barrels after proofing tests.

Milfoam will be displaying their products and answering any questions at this year's Eurosatory. To view the product range and discuss your bespoke requirements in modern cleaning packages visit the Milfoam/ CLP Systems stand at:

Eurosatory 2008 from 16th -20th June Stand O075g in the UK Pavilion

Tue, 17 Jun 08
Joint Venture Partnership Enhances US Army DVE-FOS System
http://www.army-technology.com/contractors/computers/digital-systems/press1.html
Digital Systems Engineering, Inc. (DSE) and Digital Design Corporation (DDC) have teamed to create a line of "smart monitors" supporting the US Army Driver's Vision Enhancer - Family of Systems (DVE-FOS) Program. Based on the LCD display requirements of DVE-FOS, DSE and DDC have contributed core technologies to design and implement the DVE Rugged Advanced Processing Tactical Overlay Recorder (RAPTOR) Series which exceeds the program's Display Control Module (DCM) specifications.

Currently, monitors installed in DVE-FOS systems are not equipped with a Digital Video Recorder (DVR). The DVE RAPTOR offers a ruggedized digital video recorder and image processing platform to upgrade the DVE-FOS system. The DVE RAPTOR can be mounted inside of any tactical wheeled vehicle; it is backwards compatible (electrically, mechanically, and user interface) with current legacy DVE installations, yet offers the latest video capabilities in image processing, graphic and symbology overlay, and digital video recording.

Through its design and display technology, the DVE RAPTOR gives users more control over situational awareness. This allows users unprecedented advantages in image analysis and processing in applications such as target acquisition, surveillance, information gathering or debriefing, intelligence recording and live capture scenarios. The DVE RAPTOR's video imaging technology provides real-time recording and/or processing of high frame-rate 16-bit hi-resolution imagery in ruggedized applications. The DVR provides multiple independent channels, a variety of conventional VCR and "Tivo" type controls, and accommodates a wide range of input and output formats.

Another key feature of the rugged DVE RAPTOR display includes integrated Night Vision Imaging System (NVIS) technology (MIL-STD-3009 Class B compliant), with a near zero color shift when used during night-time operations. This allows the DVE RAPTOR to maintain a full color picture - 24 hours a day, and the display will not bloom out Night Vision Goggles (NVGs) when at maximum brightness.

Other video image processing functions targeted at DVE-FOS include:

Local Area Processing (LAP) Advanced RS-170 Scan Conversion Image scaling and electronic zoom Electronic image stabilization Cascaded function data processing chains Data compression and storage Graphic overlay Custom user interfaces Sharpening filters Noise reduction filters Picture-in-Picture (PiP) Picture-by-Picture (PbP)

The US Army's DVE-FOS (Driver's Vision Enhancer - Family of Systems) is a program anticipated to supply Combat Vehicles (CVs) and Tactical Wheeled Vehicles (TWVs) with new infrared-based systems. Currently, prime contractors are positioning themsleves with the DVE RAPTOR to win the DVE-FOS contract. Mounted within and outside the vehicle, the DVE-FOS system gives users greater situational awareness through the use of Forward Looking Infrared (FLIR) technologies.

Tue, 17 Jun 08
Piranha V
http://www.army-technology.com/projects/piranhav/
General Dynamics United Kingdom Limited has been selected by the UK Ministry of Defence as the provisionally preferred bidder for the Utility Vehicle Design (UVD) for the Future Rapid Effect System (FRES). The UK MoD announced the selection in May 2008.

Subject to satisfactory completion of the package of work on risk reduction, General Dynamics UK will develop the Piranha V as the FRES utility vehicle for the British Army. The company will now enter negotiations with the MoD to determine the scope of development work required.

"General Dynamics UK will develop the Piranha V as the FRES utility vehicle for the British Army."

The development of the Piranha V is being carried out by General Dynamics UK and Mowag of Switzerland (part of the General Dynamics European Land Combat Systems group). The manufacture of the first Piranha V prototype will be completed by the end of 2008 and a schedule is in place to ramp up to production status compatible with the Initial Operational Capability (IOC) date of 2012, with transfer of this capability into the UK to ensure UK sovereign control through-life.

The Piranha V 8x8 is the fifth-generation of the family of Piranha wheeled utility vehicles and is being developed by General Dynamics, using private venture funding, specifically to meet the UK armed forces' FRES requirement.

The Piranha V is a British development of a European design and therefore free of the US Department of Defense International Traffic in Arms Regulations (ITAR) restrictions, thus simplifying its transfer into the UK to meet the UK defence industrial strategy objectives.

A large number of Piranha vehicles are currently deployed on operations in Iraq and Afghanistan. Since 1996 the Piranha vehicles have been built in 6x6, 8x8 and 10x10 variants and, by the end of 2007, more than 9,000 variants of Piranha vehicles were on order or in service in over 20 nations' armed forces worldwide, including the US Army's Stryker vehicle, a variant of the Piranha III.

In June 2007, the UK MoD announced that the Piranha vehicle was one of three vehicles selected for the FRES utility vehicle 'Trials of Truth'. The Piranha Evolution vehicle was General Dynamics' candidate vehicle in these trials, which were held in 2007 at the MoD's armoured trials and development unit at Bovington. The Piranha Evolution vehicle is an interim design and is the basis for the development of the Piranha V.

The trial of the Piranha Evolution provided a demonstration of the potential of Piranha to meet the FRES threshold requirements and the stretch potential to meet the emerging and future requirements which will develop with the armed forces' evolving operational needs.

General Dynamics UK has established a programme office in Bristol, UK, to provide a focal point for its FRES partnership with industry and the Ministry of Defence. General Dynamics is evaluating a range of options for the manufacture, assembly and test within the UK. This includes an evaluation of existing and new facilities.

PIRANHA V VEHICLE

"The manufacture of the first Piranha V prototype will be completed by the end of 2008."

The main differences between the Piranha V vehicle and the current variants are: higher levels of protection, up-rated drive-train to cater for weight growth, greater internal volume, improved mobility, enhanced power and power management and a modern, open, electronic architecture.

Piranha V has significant additional internal capacity over the existing fleet of vehicles. The additional capacity will ease the burden on stowage and the carriage of supporting weaponry and materiel.

Assisted steering is provided on the two front pairs of wheels and the rear wheels. The wheels are fitted with run flat tyres, a central tyre inflation system and anti-lock braking. The pressure of each tyre is automatically controlled at 30-second intervals. The crew can set the tyre pressure to pre-selected pressures for metalled road, cross country, sandy terrain and for emergency operation, optimising the vehicle for ride and tactical mobility.

The vehicle has the capacity to generate increased electrical power on demand and has an integrated power management system. The power system will accommodate new systems and technologies which are currently under development.

The 28t gross weight meets the MoD's 30t weight envelope for rapid deployment in the A400M transport aircraft.

WEAPONS

Piranha has already demonstrated a broad range of weapon systems mounted on the platform to suit mission requirements: e.g. 12.7mm, 25mm, 30mm or low-recoil 105mm guns, including Rheinmetall Landsysteme weapon station with 12.7mm gun and Delco Systems 25mm and 30mm turrets.

SURVIVABILITY

The Piranha V provides a greatly increased level of protection compared to the earlier Piranha variants. The improvements have benefited from direct experience of Piranha on operations in Iraq and Afghanistan.

"The Piranha V 8Ã—8 is the fifth-generation of the family of Piranha wheeled utility vehicles."

The internal and external physical layout of the vehicle, the integrated mine-protected seats and a range of other survivability features are incorporated into the design.

The Piranha designs incorporate shaped hull plates to optimise against blast, spacing in the add-on armour and surface coatings to minimise the thermal and radar signatures.

The modular armour system provides protection against Rocket-Propelled Grenades (RPGs), 14.5mm armour-piercing rounds through 360Â° and 30mm armour piercing rounds across the 30Â° frontal arc. The hull provides protection against 8kg anti-tank mines.

Development work has been carried out for the integration of a Hard-Kill Defensive Aids Suite (HK DAS) and protection against Improvised Explosive Devices (IEDs) on Piranha V.

The Piranha V has the capacity to generate increased power to enable the effective application of selected or developing survivability technologies as they become available, such as hard or soft-kill defensive aid systems or electric armour.

COMMAND AND CONTROL

The Piranha V and its predecessor the Piranha Evolution are fitted with the Bowman secure tactical digital communications system. The voice and data communications system does not require encoding and decoding. A global positioning system processor is integrated into each Bowman radio that updates all the other radios on the network. The system provides fast secure tactical digital communications and enhanced situational awareness with automatic location and navigation reporting.

The Piranha V has a fully integrated FRES utility vehicle electronic architecture. The architecture is integrated with the Battle Command Integration Programme (BCIP), local and on-board situational awareness suite, the Health and Usage Monitoring System (HUMS), the collective protection systems (COLPRO) and the remote weapon station.

ENGINE

The vehicle is powered by an MTU 6V199 TE20 diesel engine, rated at 550hp, with a ZF 7HP 902 seven-speed electronically controlled automatic transmission. The vehicle meets European emissions standards.

"A large number of Piranha vehicles are currently deployed on operations in Iraq and Afghanistan."

The power-to-weight ratio is dependent on the mission configuration and combat weight of the vehicle and is approximately 20hp/t at 28t combat weight and with the TE20 550hp engine.

During the MoD's trials at Bovington in 2007, the power pack was removed, reinstalled and running in less than an hour in an ease-of-maintenance assessme

Thu, 12 Jun 08
Uniteam Supports the Earthquake Victims in China.
http://www.army-technology.com/contractors/field/uniteam/press14.html
The earthquake that jolted China's Sichuan Province on May 12 has left a lot of children without school buildings. Uniteam International has donated Rapid Deployable Shelters (RDS) to the Red Cross Society of China to function as temporary classrooms in the catastrophe area.

The Uniteam Group has long since had companies and production facilities in China, and feels very much for the suffering of the Chinese people affected by the earthquake. We therefore felt it natural to contribute when asked by the Chinese Red Cross.

The Rapid Deployments Shelters (RDS), also called Quick Shelters, are ideal for temporary school buildings, offices or accommodation units. Each units are erected in less than ten minutes.

The Uniteam Group has established a separate unit in China, specialized in supplying equipment for relief projects. We supply everything from family cooking sets, water cleaning tablets, shelters to complete mobile hospitals.

Thu, 12 Jun 08
NEW FISCHER ALULITE CONNECTORS - WHEN WEIGHT MATTERS
http://www.army-technology.com/contractors/electronic/fischerconnectors/press5.html
Are weight considerations important in the development of your defense and security equipment? Significantly 50% lighter than typical metal connectors while still offering excellent strength to weight ratio, the new aluminium engineered Fischer AluLite Series is your solution to ultralight product design.

As increasingly sophisticated electronic systems are integrated into air, land, and sea-based applications, demand for lightweight, small and robust interconnect systems grows, making the use of aluminium in product development a natural choice. Ultralight, compact and rugged, the new Fischer AluLite range is ideal for mobile equipment, such as communication systems, personal role radios, rugged computers, soldier harnesses, or surveillance systems.

Available in a range of non-reflective camouflage colors, the Fischer AluLite connectors easily integrate with your product design. Rugged, 360Â° EMC shielded, sealed up to IP68 (2m/24h) or even hermetic, they can withstand harsh conditions. Ideal for frequent connect / disconnect operations or blind mating, the plugs and receptacles are engineered to endure more than 5,000 mating cycles within a temperature range of -50Â°C to +150Â°C. Additionally, the anodized finished connector housing is engineered with an aluminium alloy specifically chosen for its anticorrosion property.

Accepting cable diameters from 1.4 to 10.7mm, the new AluLite series is available in multipole from 2 to 27 pins with solder, PCB or crimp contacts and, upon request, in coax, triax or hybrid contact configurations. The choice of body styles is wide: standard-sized or short plugs, push-pull locking mechanism or emergency release system, front projecting or flush receptacles, front or rear mounting models. This high flexibility of configurations makes it easier to find the connector dedicated to providing a solution to your specific product design.

For more than 50 years, Fischer Connectors has been designing, manufacturing and distributing high-performance connectors and cable assembly solutions. Known for their reliability, precision, and resistance to demanding environments, its products are commonly used in major military programs. Primary design and manufacturing facilities are located in Switzerland, with subsidiaries and distributors located worldwide.

Thu, 12 Jun 08
Intermat
http://www.army-technology.com/contractors/camouflage/intermat
Intermat specialize in special-countermeasure wide-spectrum anti-IR coating materials (400nm - 20000nm) for concealment against thermal observation and deception of heat-seeking missiles. Intermat is widely known for being the only company promoting these state-of-the-art, anti-thermal coating materials that have been developed after many years of R&D.

ANTI-THERMAL / ANTI-IR CAMOUFLAGE COATING MATERIALS

Intermat's anti-thermal / anti-IR coating materials are not just other camouflage paints that you have come across before. They are truly the most advanced technological achievement of electronic / thermal-type camouflage coating materials for all military assets. The fundamental principle regarding the application is perfect thermal concealment, so that assets are unidentifiable by all modern IR sensors and thermal tracking systems.

CAMOUFLAGE YOUR THERMAL SIGNATURE

One of the most commonly used techniques for tracing and scanning is the use of infrared photography that reveals those objects that are hotter than their surrounding environment. By using Intermat coating materials, you can achieve a balance / equalization between the environment's IR signature and the thermal signature of the asset.

As a result, assets cannot be identified by IR or other thermal devices in the near, mid, or far spectrum (sniper scopes, NVGs, thermal-viewers, FLIRs, CVTTS, LANTIRN, LRASSS, laser designators, GPS / INS aided missiles that use IR sensors during final approach, satellites), simply because the asset is not seen or identified as hotter than its environment.

NATO'S STANAG AND IR-THREAT DEFINITION UPDATE

NATO has recently updated its standards with regards to which area of the spectrum a thermal threat is defined at. This information is now registered into NATO's database (up to 12000nm). This is a big step forward from what a thermal threat was perceived to be in the past (spectrum in the region of 1000nm - 1972 specification).

This update on thermal threat definition strengthens the specification of our coating materials, fully protecting you at the wide spectrum of 400nm to 20000nm against all IR threats. In addition, our advanced-technology coating materials are in full compliance with NATO's Standardization Agreement 4319 under the title 'Counter-Surveillance Requirements for Future Main Battle Tanks - Infrared / Thermal Aspects'.

COATING MATERIALS' CHARACTERISTICS

Coating materials achieve up to 50% IR signature reduction (unique feature internationally)

They can reduce external temperature up to 65%

They are effective in the wide IR spectrum of 400nm to 20000nm

They resemble the assets' thermal signature, with the environment's IR signature

They can be applied on any asset, either mobile, fixed, aerial, naval

Coating materials are passive to the environment and when applied they stay on guard day or night, 365 days per year and for a long time.

BENEFITS OF INTERMAT ANTI-THERMAL CAMOUFLAGE

You adapt to the IR environment of your area You are protected from thermal threat Your survivability in a complex and advanced military environment is significantly optimized You gain a sustainable advantage Targeting friendly assets is avoided Coating materials can be used as a permanent countermeasure during day or night, 365 days a year You can finally do away with traditional and conventional means of concealment that limit mobility, are user-dependent, require valuable resources, and often undermine the secrecy of the plan

With Intermat paints you can make an entire area disappear 365 days a year.

ANTI-THERMAL CREAM FOR SPECIAL FORCES

It is also very important to note that Intermat is constantly evolving this technology. The most recent progress entails PVC painting and the creation of an anti-thermal camouflage cream intended for special forces.

The anti-thermal camouflage cream can be applied on the uncovered part of the body (face, hands), so that the soldier can pass unnoticed, not only at the level of optical camouflage but most importantly being undetected by thermal tracking devices. Tests revealed that normally a soldier could be easily detected at 1,000m, but with Intermat's anti-thermal cream they would have to approach at a distance of about 150m to 200m before they can be exposed.

We believe that we offer the latest development of a unique technology, and although attempts have been made in the past to produce paints with anti-IR properties, these were proven inferior and are already considered obsolete in comparison to what Intermat can now deliver with proven tests and results both at the real-life battlefield and the laboratory.

NATO Cage Code: G1836

D-U-N-S number: 499452469

Wed, 11 Jun 08
SCARÂ™ Assault Rifle on Display at Eurosatory
http://www.army-technology.com/contractors/machine_guns/fnherstal/press10.html
FN Herstal is pleased to announce that the SCARÂ™ assault rifle will be officially introduced onto the international market at EUROSATORY in Paris (France) from June 16 to 20.

The SCAR family was originally designed and developed by FN Herstal following a solicitation by USSOCOM for a family of assault rifles, designed around two different calibers but featuring high commonality of parts and identical ergonomics. FN Herstal took part in the full and open competition and the FN SCAR was chosen among nine proposals.

The SCAR family consists of two highly adaptable modular rifles, the SCAR-L chambered in 5.56mm x 45mm NATO caliber and the SCAR-H chambered in 7.62mm x 51mm NATO caliber, and the FN40GL 40mm low-velocity grenade launcher.

Both SCAR rifles are available with two different barrel lengths: a short barrel for close-quarter combat and a standard barrel for longer distances. The FN40GL grenade launcher quickly mounts onto the lower rail of either SCAR rifle and can be easily configured for use as a stand-alone weapon as well.

All visitors coming to visit our stand at Eurosatory will get their own SCAR package including Dick Kramer poster (subject to availability).

FN Herstal's stand will be located in Hall 6, Belgian Pavilion, stand no. F100k. FN Herstal designs, develops and manufactures a full range of light and portable weapons, integrated weapon systems and ammunition for military and law enforcement agencies worldwide.

Wed, 11 Jun 08
Port-A-Cool Explosion Proof Units Offer Cooling Alternative
http://www.army-technology.com/contractors/hvac/port-a-cool/press1.html
Offshore drilling rigs are exposed to some of the most severe environments imaginable. High levels of humidity and salt spray must be continually battled to ensure metal surfaces escape corrosion and permanent damage. No matter what the weather brings, rig operators are challenged every day to protect equipment from environmental damage by repairing or applying protective coatings to equipment. In addition to dealing with the weather, rig operators must take the necessary precautions to avoid potential explosions from the hazardous environments where they work.

Hazardous locations are areas where a potential for explosion and fire are a constant threat due to flammable gases, vapors, or finely pulverized dust in the air. Easily ignitable fibers or flyings might also pose a threat for explosion. Hazardous locations may result from the normal processing of certain volatile chemicals, gases, grains, or accidental failure of storage systems for these materials. Whatever the cause, it is necessary that every precaution be taken to guard against ignition of the atmosphere. So, what can a rig operator do to keep workers cool?

The explosion-proof models manufactured by Port-A-Cool portable evaporative cooling units can help rig operators meet this challenge. The 36-inch or 48-inch explosion proof/hazardous location models were specially developed by Port-A-Cool for use on offshore platforms. Electrical components can be a source of ignition for these hazardous location areas, but Port-A-Cool explosion proof models feature sealed switches, cords and motors to prevent sparking and accidental explosion in highly-combustible areas. In addition, the unit housings are rotationally molded and are leak and rust proof, preventing the rust and deterioration found in metal cooling systems.

The 36-inch explosion proof model is a best seller. cools 2,500 square feet and delivers 9,600 CFM. The 48-inch explosion proof model cools a large 4,000 square feet, delivers 17,500 CFM, and comes standard with heavy duty casters for extra mobility. Both models lower the temperature an average of 15 to 25Â°F.

Wed, 11 Jun 08
Heat Stroke
http://www.army-technology.com/contractors/hvac/port-a-cool/press3.html
With summer temperatures steadily climbing into triple digits, the potential for heat stroke becomes a real concern for those exposed to high temperature environments.

"High Temperature Environments," are generally referred to as those over 87Â°F for light work, over 82Â°F for moderate work and over 78Â°F for heavy work. This amount requires 25% rest time for every 75% of work time, according to OSHA, with additional rest times for higher temperature environments. For example, work place temperatures over 86Â°F require 75% rest time for every 25% of work time when a worker is producing a heavy workload.

According to the Occupational Safety and Health Administration (OSHA), the Center for Disease Control (CDC), the US Department of Health, and the University of Michigan, employees required to work in high temperature environments should be allowed to take frequent breaks in a cool place.

According to OSHA 'rest period' recommendations, if a staff of 100 workers takes ONE additional 10-minute rest period per day, the cost to the company will be 16 hours and 40 minutes in lost production time per day or 83 hours and 20 minutes per week. In terms of dollars, at $18 per hour pay rate, excluding overtime and including benefits, the cost to the company will be US$1,500 per week or US$19,500 over the course of a 13-week summer.

According to these same organizations, high temperature work environments can lead to a variety of heat-illnesses including: heat stroke, heat stress, heat strain, heat collapse, heat cramps, heat exhaustion, heat fatigue and heat rash.

Also according to these groups, if frequent breaks are not taken, workers are at risk of physical symptoms such as nausea, headaches, dizziness, cramps, confusion, unconsciousness, seizure and even death. Mentally, workers can become drowsy, unfocused, moody, and the effects of heat stress have been shown to contribute to accidents, work slowdowns and walkouts, according to the Southwest Michigan Coalition on Safety and Health.

All these groups recommend ventilation as a preventative and some specifically recommend evaporative cooling where available, citing the inefficiency and high cost of installing and operating central air conditioning and the additional benefit of portable evaporative cooling and the ability to direct spot cooling where desired.

Port-A-CoolÂ® portable evaporative cooling units provide fresh cool air and require nothing but tap water and 110v of electricity to operate. Evaporative cooling has also been proven to improve indoor air quality because of the introduction of fresh air and moisture that the unit produces. The energy costs are also lowered by as much as 3/4th when utilizing evaporative cooling.

For providing 100% fresh, cool air for warehouse or shop employees, kennels, poultry houses, gymnasiums, or during outdoor activities, Port-A-Cool units are the only choice.

Wed, 11 Jun 08
PCTI
http://www.army-technology.com/contractors/electrical/power-conversion
Power Conversion Technologies, Inc. (PCTI) has been providing leading-edge power electronic solutions to military, aerospace and commercial industrial customers since 1992. Our power conversion systems operate in numerous military applications including missile launch control, communication systems, mobile ground support, backup battery systems, submarine battery charging, weapons laboratories, shipboard frequency conversion and many others. PCTI manufactures both standard and custom power electronics for all branches of the DOD as well as prime contractors such as Boeing, Raytheon, General Dynamics, and BAE Systems.

PCTI POWER CONVERSION PRODUCTS

PCTI's products address the highest power range of power electronic equipment available from 2KVA/KW to 15MVA/MW. We offer a variety of modular standard products, Mil-Spec products and custom designed equipment for your application. Options may include computer interfaces (IEEE 488.2, RS232, RS485, GPIB) and cooling methods such as forced air, heatpipe, direct water, closed-loop water-to-water heat exchanger and natural convection. Applied technologies include high-frequency switched mode designs, DSP control, PWM, and IGBT technology. Our product scope includes:

High current battery chargers (switched mode or linear)

Inverters DC/AC, DC/DC, AC/DC and AC/AC

Frequency converters, 50Hz/60Hz to 400Hz, 50Hz to 60Hz, 60Hz to 50Hz

DC power supplies / rectifiers high-current, low voltage (switched mode or linear)

HIGH CURRENT BATTERY CHARGERS

PCTI offers rugged high-current battery chargers to meet all of your high-current industrial charging applications in all standard voltages with current ratings from 25A to 2,000A. Our battery chargers are offered using classic linear or switched mode technology providing a smaller, lighter battery charger.

Our standard battery charger includes a battery eliminator, float and equalize adjustments, manual equalize timer, automatic shutdown and restart. Options include computer interface, discharge capability, temperature compensation circuit and more. PCTI battery chargers are used in a number of critical applications including backup power for control relay stations in hydroelectric dams, submarine battery charging.

INVERTERS

PCTI can provide the inverter you need for your specific application whether your application is DC/AC, DC/DC, AC/DC and AC/AC or you need to change the frequency. PCTI inverters are digital signal processor (DSP) controlled based on IGBT PWM technology delivering a pure sine wave with less than 1% THD and 90% or better efficiency. This superior next-generation control allows us to provide a single control board solution for the inverter, thus increasing reliability by reducing control components. It also permits us to offer a universal DC input from 300VDC to 700VDC. Power ranges include from 1kVA/KW to 500kVA/KW.

FREQUENCY CONVERTERS

PCTI frequency converters can be used for 400Hz aircraft ground support, convert 50 to 60Hz or converter 60Hz to 50Hz. PCTI frequency converters are digital signal processor (DSP) controlled based on IGBT PWM technology delivering a pure sine wave with less than 2% THD and 90% or better efficiency. This superior next-generation control allows us to provide a single control board solution for the inverter, thus increasing reliability by reducing control components. Our 400Hz frequency converters meet the standards of MIL-STD-704F, MIL-STD-461, and MIL-STD-810.

DC POWER SUPPLY (RECTIFIERS)

PCTI's regulated DC power supplies are a solid-state unit utilizing primary SCR (thyristor) technology in a full-bridge rectifier or switched mode IGBT based on DSP PWM technology, constant voltage control, constant current control, automatic crossover series regulation, DC filter, instrumentation, and many operational and protective monitoring features. Power supply designs are available in ratings from 1kW to 15MW with current ratings up to 120kA. PCTI also offers switched mode technology up to 100kW without paralleling.

Wed, 11 Jun 08
Phoenix International's ATV
http://www.army-technology.com/contractors/vehicles/atv
The Prowler LTATV from Phoenix International Systems' all terrain vehicle division is the only light tactical wheeled vehicle of its class that is purpose-built for the military, with its design and manufacture based on actual field recommendations and evaluation input from actual military operations.

Prowlers offer unique advantages that overcome the severe limitations of generic recreational ATVs (including those "modified for military use") in terms of endurance, reliability, operator control and safety. While similar in size and appearance to a typical ATV, the Prowler RTV is completely different in operation, structural design and performance. Prowlers are faster, more rugged, reliable and stable, and can pull or carry greater payloads than any other ATV-type vehicle made or modified.

PROWLER: A PROVEN INTERNALLY TRANSPORTABLE VEHICLE (ITV)

The Prowler is the only LTATV that is a proven Internally Transportable Vehicle (ITV) for the lightest of cargo aircraft. Its weight and dimensional envelope allows it to be easily deployed in aircraft such as the CV-22 and CH-16, CH-47, CH-52 and CH-60 series helicopters.

For deployment in the NH90, with its more restricted cargo or crew access dimension, ATV offers a 'pivot lock' ROPS that eliminates any requirement for disassembly or assembly effort, ensuring immediate deployment of a fully equipped and crewed vehicle upon touchdown.

THIRD SEAT OPTION CONFIGURATION

The Prowler is manufactured with two standard forward seats, with a third rear-facing seat available as an option.

PROWLER LIGHT TACTICAL VEHICLES APPLICATIONS

Prowler light tactical vehicles provide a light tactical mobility platform capability for use in non-traditional combat, reconnaissance and logistic support with an unmatched combination of mission-critical characteristics:

Rugged and reliable performance in any terrain or climate Easily deployed, including as an ITV by aircraft such as the CV-22 and CH-46, CH-47, CH-52 and CH-60 series helicopters Multi-mission configurable for assault, ISR, SAR or logistic support Unparalleled operator protection

Since its introduction in 1992, the Prowler has been deployed by military forces across a wide range of combat, reconnaissance and SAR missions around the world. Prowler field testing has resulted in enthusiastic After Action Reports (AARs) from the military, emphasizing the vehicle's outstanding performance in terms of safety, endurance, reliability and adaptability.

UNMANNED GROUND VEHICLE (UGV) PLATFORM

In addition to its classic mission, the versatile Prowler platform has been and is being used in a number of autonomous robotic and remotely controlled applications, including IED, mine sweeping EOD and for DARPA Grand Challenge participants.

PROWLER PERFORMANCE AND FEATURES

Prowler hallmark all-terrain performance ‐ exceptional stability, endurance, speed, power, reliability and versatility ‐ is based upon the Prowler's standard configuration, which provides:

Powerful four-stroke liquid-cooled engine

Fully automatic four-wheel drive

Front and rear extended range independent wishbone suspension Automotive-style controls and engineering for minimal maintenance

Sealed steel-frame construction with chrome alloy ROPS and cargo racks

EMT run-flat tires and double-reinforced wheels

Low center of gravity, tight turning radius and high ground clearance

Dual hydraulic disc brakes full engine braking on all four drive wheels

Speed of up to 63mph (4WD, hi-range)

Payload capacity of 1,600lb

3,550lb towing capacity (terrain dependent)

3,000lb remote-control winch

AVAILABLE ON GSA SCHEDULE

The Prowler is manufactured by All Terrain Vehicle, a subsidiary of Phoenix International Systems (Orange, California), an ISO 9001:2000 certified SDVOSB that has been supplying state-of-the-art COTS products in support of military operations since 1993. The vehicles are available under GSA schedule contract number GS503F0056T.

Wed, 11 Jun 08
Phantom Technologies
http://www.army-technology.com/contractors/jamming/phantom
Phantom Technologies works side by side with police forces, military special units and other law enforcement agencies. This kind of cooperation allows Phantom Technologies to keep manufacturing the best solutions for customers' special requirements.

Phantom's product line consists of programmable jammers for wireless and cellular communications. Since 1996, Phantom Technologies has specialised in the development and manufacture of special jammers for both cellular and RF communications bands.

CCJ SERIES CELLULAR AND SATELLITE PHONE COMMUNICATIVE JAMMER

The CCJ series cellular and satellite phone communicative jammer system includes a number of elements working together that can be controlled by the PC according to the client's requirements.

This cellular and satellite phone communicative jammer provides excellent performance and can be supplied with extra options, such as the WLAN blocking system with adjustable output power and our CSM1800 cellular phone detector. It is a fully responsive system.

Phantom Technologies also provides a sight surveys service, and our motto is "Easier to escape than to talk. Phantom."

RCJ2350 ‐ BROADBAND RF COMMUNICATION JAMMER

The RCJ2350 is a very high power jammer, designed for blocking two-way communication radios. The RCJ2350 uses state-of-the-art technology for maximum performance.

The unit is controlled by microprocessors for PLL programming and uses unique modulation techniques based on mixed signals for maximum jamming efficiency. Each module of the RCJ2350 transmits a unique noise signal that creates a 'firewall' between the transmitter and its receiver.

The jamming signal is generated by a multi-VCO chain which results in very high sweeping time along the bands, hence creating high RF density in each part of the protected frequency band.

The jamming radius of the RCJ2350 depends on several conditions such as transmitter frequency and output power, distance to receiver and obstacles between. System modularity allows flexible usage in different applications. The system uses broadband omni-directional antennas for 360Âº protection.

CCJ1890 ‐ CELLULAR COMMUNICATION JAMMER AND MOBILE PHONE JAMMER

The CCJ1890 has been designed for blocking GSM cellular networks and all kinds of cellular standards in the world. The CCJ1890 uses state-of-the-art technology for maximum performance. The unit is controlled by a microprocessor for PLL programming.

The CCJ1890 transmits a noise signal which cuts-off all cellular communication between mobile phones and cellular cells. The jamming radius depends on the strength signal in a given area. All cellular mobiles in the vicinity of the CCJ1890 will be totally blocked and will not be able to receive or dial outgoing calls. When the CCJ1890 affects a mobile the display will show 'no service'.

ABOUT PHANTOM TECHNOLOGIES

Phantom Technologies staffs a research and development team that engineers high-end jammers using most advanced components available. The R&D team also designs custom jammers for special orders that typically exceed the customer's expectations for performance and reliability.

Phantom Technologies uses state-of-the-art measurement equipment in the development and testing of our products. During the manufacturing process each component in the system is tested under strict conditions following special measurement procedures.

We test 100% of the finished products before shipment to assure they meet our published specifications. The practice guarantees high performance and high reliability for long period of time.

Phantom Technologies is Israel's leading manufacturer of jamming products. We supply special equipment to the IDF, special police forces, Motorola, local authorities, television companies, etc.

Our customers understand that high reliability is achieved by good engineering practices. Phantom Technologies provides after sales technical support to assure your satisfaction.

Tue, 10 Jun 08
An Ancient Technique for a High Tech Society
http://www.army-technology.com/contractors/hvac/port-a-cool/press2.html
Remember the chill after swimming on a hot, dry day, then getting out of the water and feeling the wind hitting your wet skin? Or simply try dipping your finger in a glass of water, then blowing air across your finger and feeling the cool sensation as the water evaporates. That's evaporative cooling.

Try the same thing when there is no wind or no air moving. The surrounding air is quickly saturated with moisture, there is no evaporation and the cooling effect is gone.

Evaporative cooling units create this naturally occurring process and provide a constant flow of cool, refreshing air into a hot, uncomfortable environment.

HOW DOES IT WORK?

The heart of an evaporative cooling system is the pad where the water evaporates and the air passing through the pads is cooled.

Evaporative cooling pads, like Kuul pads, are manufactured of fluted cellulose sheets that are glued together. This material is chemically impregnated with special compounds to prevent rot and ensure a long service life.

A special water distribution system spreads water over the surface of the pad, ensuring a uniform supply of water to keep the entire air contact surface thoroughly wetted."

Fans create a negative pressure, causing air to be drawn through the pads.

Evaporation results from contact between air and water. A control system operates the water pump and the fan distributes the cool air.

The relative humidity is lowest in the afternoon when the temperature is at its highest. And the lower the humidity, the better the evaporative cooling effect. In other words, the cooling effect is best when you need it the most.

EVAPORATIVE COOLING VS TRADITIONAL AIR CONDITIONING

Evaporative coolers and central air conditioners both serve the same important purpose: keeping us cool. But these two systems operate very differently. Understanding the difference can help get the most out of any system and minimize wasted energy.

Evaporative coolers cool air by filtering it through water, thus lowering the air's temperature. Evaporative coolers produce humid air because the air absorbs water during the cooling process. These systems work best when a small amount of outside air circulates into the space where the evaporative cooler is employed. This also introduces fresh air into the environment and reduces the risk of poor indoor air quality.

Central air conditioners, on the other hand, work by taking humidity out of the home. These systems produce cold, dry air and work best in an airtight home.

The major advantage of an evaporative cooler is that its operating costs are typically one-third those of a central air conditioner. The initial equipment cost is also lower than air conditioners. Along with lower operating costs and simple installation, evaporative cooling can be a perfect, ozone-friendly alternative to traditional air conditioning.

IS IT GOOD FOR THE ENVIRONMENT?

Refrigerated cooling makes the air dry and uses refrigerants, which may harm the environment. Evaporative cooling, however, is based on a totally natural process of air cooled by water which means it won't dry out the air, irritate your skin, throat or eyes, or affect the environment.

Evaporative cooling is the healthiest way to cool because it replaces stale air with clean, fresh air many times an hour - remember, you keep your doors and windows open. The air is never re-circulated which means smells and airborne germs are expelled.

WILL IT SAVE ME MONEY?

Evaporative cooling is also up to 50% cheaper to install and three times cheaper to run than refrigerated cooling. Typically, the cost for water and electricity for a 36in unit for eight hours of operation is less than US$1.00. Smaller units will operate for longer periods for the same amount of money.

That's approximately three times cheaper than traditional air conditioning.

EVAPORATIVE COOLING AND HEAT STRESS

Heat stress can occur in people, animals and even equipment. According to the Occupational Safety and Health Administration (OSHA) and other agencies, employees required to work in high temperature environments should be allowed frequent breaks in a cool place to avoid symptoms of heat stress including nausea, dizziness, cramps, confusion, unconsciousness, seizure and even death. High temperature environments are generally referred to as those over 87Â°F for light work, over 82Â°F for moderate work and over 78Â°F for heavy work.

According to the "Journal of Dairy Science", across all animal classes, the estimated national annual losses to heat stress are estimated at US$2.4 billion. In cattle, heat stress reduces fertility and milk production in cows and can cause udder infections and even mortality during the hot summer months. Heat stress is also to blame for a high percentage of piglet and poultry mortality.

Evaporative cooling units, like Port-A-Cool, can lower the ambient temperature 15 to 25Â°F, turning a restrictive 90Â°F area into a comfortable 70Â°F area.

Tue, 10 Jun 08
Peli Products Leads the Way in Environmentally Friendly Area Lighting with the Acquisition of Blue i UK
http://www.army-technology.com/contractors/transport/peli/press12.html
PeliÂ™ Products, the global leader in the design and manufacture of virtually indestructible cases and advanced lighting systems today announces the acquisition of innovative lighting manufacturer Blue i UK Ltd. This purchase will enable Peli Products to expand its presence in Europe, Middle East and Africa while continuing to develop new products and technologies.

The acquisition of Blue i complements Peli Products strategic vision to position the company as the pioneer in new lighting technology, and further supports the company's leadership position in the global lighting technology market.

In 2003 the company revolutionised the lighting industry with the creation of Recoil LED technology. Now, through the acquisition of Blue i, Peli Products takes a further step towards the launch of its Advanced Area Lighting Group (AALG), a new line of products bringing next generation Area Lighting Technology to market.

The Advanced Area Lighting Group will drive primary R&D to bring portable, powerful, energy-efficient and environmentally responsible lighting technology to remote area applications.

"More than three decades ago Peli Products pioneered an entirely new industry for protective case design and manufacture and is still recognized today as the global leader," said Lyndon Faulkner, president and CEO of Peli Products.

"We are taking that same pioneering spirit to become the leader in designing and building the most advanced environmentally safe and energy-efficient lighting technology on the market. The lighting industry hasn't even scratched the surface in effectively integrating LED technology into commercial applications for lighting large areas - that is the sole focus of the AALG and the major reason we have acquired Blue i."

Through the acquisition of Blue i UK, Peli Products will be manufacturing in the UK for the first time. Blue i UK is a leading-edge designer and manufacturer of maintenance free portable lighting products with a recognised tradition of innovation and award winning products and services. Their expertise in LED technology and cordless portable technology is an ideal addition to Peli(TM) Products AALG.

Blue i founders, Neil Walker and Darren Judd, were recognized last year for Blue i's success as a finalist for HSBC's annual: "Start-up Stars" Awards in the UK for new and growing businesses. Now, the two join Peli Products lighting group to continue inventing the future of advanced lighting.

The acquisition of Blue i UK enables Peli Products to position itself as the lighting technology leader in launching handheld, remote area and area lighting systems. Along with the creation of the AALG, Peli is bringing new technology to a US$4 billion area lighting technology division.

The new area lighting systems being designed and built by Peli Products after the acquisition of Blue i are harnessing the power and energy-efficiency of Light Emitting Diode (LED) technology and taking it into new commercial applications beyond the company's rugged and powerful handheld torches that are used by militaries, first responders and in industrial and hazardous settings around the world.

Peli Products already delivers the battery-powered portable area lighting systems that provide 15 hours of continuous light and approximately 50,000 hours bulb lifespan for such end users as nighttime road construction crews, railway engineers and first responders.

The systems are designed for anyone who needs to illuminate a large area without the gas consumption, noise and air pollution associated with today's industrial diesel generator-powered lighting towers that use energy-zapping outdated light bulb technology.

The company is developing an ambitious expansion plan in the EMEA region that involves Germany, France, Spain and the United Kingdom, among other countries. At the end of last year Peli Products started manufacturing six of their most popular Protector Case models in Germany. The company predicts calls for additional models to be produced at this new facility in 2008 in order to meet increasing global demand.

Peli Products has also opened offices in France and Germany and is in the process of opening one in the UAE. The company bases its EMEA headquarters in Spain, where it has doubled its staff to support the growth. "Our objective is to strengthen our offering and therefore our position as a leader in the EMEA markets", says Lyndon Faulkner. "This commitment is part of an aggressive plan that will triple our sales over the next five years."

Mon, 9 Jun 08
C.E. Niehoff
http://www.army-technology.com/contractors/electrical/ce-niehoff
C. E. Niehoff & Co. was founded in 1923, it is an employee-owned American company staffed with between 200 and 499 workers. It has become a leader in the design and manufacture of heavy duty brushless alternators.

The absence of brushes and slip-rings yields the highest reliability for heavy-duty applications. Brushes and slip-rings are subject to wear and to frequent replacement; their elimination extends service life.

The high efficiency of C. E. Niehoff&squo;s (CEN) unique design requires less engine horsepower and fuel to produce the high output required in the emergency vehicle, railroad, bus, and military markets.

HEAVY DUTY BRUSHLESS ALTERNATORS

Our brushless alternators are designed with the most demanding applications in mind, to minimize your downtime and maximize your operating efficiencies. Models are customized for niche markets with a wide range of output capabilities and a variety of market specific features.

CEN alternators are designed to withstand chaff, dust and corrosive agents of agriculture, construction, marine and mining environments. The brushless design eliminates internal arcing making it ideal for operation in volatile environments.

Standard products range from 50A to 600A in a variety of voltages. Features also include:

Stationary field and stator windings

High efficiency, high temperature insulation and coating

Copper and brass output terminal

Steel shell

Heavy duty bearing systems

Air-cooling systems

Inherently balanced rotors and coatings to protect against vibration, corrosion and contaminants

Dual-voltage operation, overvoltage cut-out, load dump protection, reverse polarity protection, and EMI suppression, originated as specifications in military applications and have now become popular features in our commercial line. These high-tech capabilities have earned CEN a reputation as an engineering innovator; anticipating future requirements and designing for tomorrow&squo;s demands.

MILITARY BRUSHLESS ALTERNATORS

Our extensive experience in supplying military and other special requirement customers is the core of the advanced technology of our entire line of alternators. CEN is the principal supplier of heavy-duty military alternators into US and UK markets, supporting the product through design, development and service-life stages.

CEN products are specified on most land-based armoured vehicles such as BAE Systems Land Systems AS90, Alvis Stormer, MOWAG Piranha, Singapore Technologies Bionix, Bradley infantry fighting vehicles, HMMWV, CV90, MLRS, FMTV and United Defense vehicles.

Niehoff products are also use extensively as auxiliary power units (APUs) for silent watch, forward observation vehicles and command post vehicles.

OTHER APPLICATIONS

Equipment applications include emergency vehicles, mining, construction, bus, and hazardous duty. Custom designs are available for extreme environments and high output.

Products/services include:

Alternators

Generators

Automotive engine products

Automotive parts

Battery charger controls

Multiple battery chargers

OEM battery chargers

Battery charging systems and technology

Battery monitoring systems

Battery rechargers

Diesel engine accessories

Diesel engine parts

Diesel power generation equipment and accessories

Engine accessories

Automotive generators

Off-road vehicle parts, accessories and supplies

Constant voltage regulators

Generator voltage regulators

Voltage regulators

Sat, 7 Jun 08
Air Target Sweden
http://www.army-technology.com/contractors/training/air_target
Air Target is a well known scoring specialist since 1956. Our acoustical scoring products have been delivered to customers in more than 30 countries all over the world. Acoustical scoring is a method to measure the miss distance between a supersonic projectile or missile and a target. The range of products include: the Mini Marque and Marque scoring stations, Miss Distance Indicators (MDI), uplink command units, sleeve targets, and winches.

TRAIN MORE EFFICIENTLY AND SAVE MONEY

New scoring stations and MDIs make firing training more flexible and more realistic which is important in modern firing training.

By making use of this technology you can save money by reducing ammunition consumption and training time whilst allowing gunners and the weapon system operators get more efficient training.

CALCULATING PROJECTILE MISS DISTANCE

The shock wave generated by a passing supersonic projectile or missile is detected by an array of pressure sensitive sensors installed on or close to the target.

The amplitude and the time differences between the different sensors are used to calculate the shortest distance between the target and the projectile (the miss distance), and in what angular position the projectile passed. The scoring data are presented in real time on a colour graphic computer display. Data transmission between sensors and display is via a radio link.

GUNNERY TRAINING WITH ACOUSTICAL SCORING

Scoring gives the gunner and the weapon system operator real time information in the virtual "scoring board". This information gives a picture of each round "hitting" the "scoring board". The angular position of the score as well as a score too far off can immediately guide the gunner to improve his direction of fire. The improved results can be verified as they appear on the "scoring board".

FIRING SITUATIONS

Acoustical scoring is useful for calibers from 5.56 to 5" and above and missiles (rounds need to be supersonic in the target area). Acoustical scoring can be used for all firing situations i.e. AIR to AIR, AIR to GROUND, GROUND to AIR, GROUND to GROUND, and the corresponding naval applications.

SCORING STATIONS

Mini Marque and Marque scoring stations are used for the collection, calculation, and presentation of real time firing results from up to six targets simultaneously.

The new scoring stations Marque and Mini Marque can receive scoring data from up to six targets (MDIs) simultaneously. The software is based on Windows NT including a SQL-7 data base. Features include: Up to 40 m scoring range; Up to 6000 rounds/minute.

MISS DISTANCE INDICATORS (MDIs)

Zone, 4- and 12-sector models as well as vector models are available for all type of targets and UAVs.

The universal 12 sector MDI gives the possibility to fire at a target (MDI) coming from any direction. The target towing operator/UAV operator can offer any target courses during the same mission.

UPLINK COMMAND UNIT

This is used to remotely change the MDI frequency and sensitivity.

Other equipment includes test equipment to test the complete scoring system, sleeve targets, which are soft targets for various applications (radar, laser), and inboard target towing winches.

CUSTOMISATION OF ACOUSTICAL SCORING SYSTEMS

Customisation of our products to the customer's requirements is one of our specialities.

Sat, 7 Jun 08
Akzo Nobel Aerospace Coatings
http://www.army-technology.com/contractors/camouflage/akzo
Akzo Nobel Aerospace Coatings' (ANAC) business is a truly global enterprise with two manufacturing locations, color blending facilities and offices located across the globe. We are the largest coatings manufacturer in the world, and a global leader in military and aerospace coatings.

We offer a wide variety of products ranging from primers and topcoats to specialty coatings. Product names such as EclipseÂ®, AvioxÂ® and AlumigripÂ® are just a few of the products renowned for their high quality, endurance and performance with environmental, ease-of-application and cost-effective advantages.

MILITARY PAINT, FINISHES AND COATINGS

We produce and supply paint and finishes for a wide range of applications, such as industrial, transport, military and marine markets. We focus our daily efforts on meeting or exceeding the highest industry standards. Our leadership position, technical expertise and customer focus result in innovative, next-generation, environmentally compliant coating products.

MILITARY EQUIPMENT COATINGS

Akzo Nobel Aerospace Coatings produces technically superior high solids acrylic, polyurethane and silicone high heat topcoats that are applied to military fighters, ground equipment, transports, helicopters, engines and unmanned vehicles.

Akzo Nobel Aerospace Coatings supplies military equipment manufacturers and refurbishers with a full range of primers, topcoats and specialty coatings. ANAC topcoat systems and finishes reflect the requirements of a distinctive and demanding market.Â

CAMOUFLAGE, CARC, THEMAL AND IR COATINGS

Interior and exterior coatings include visible camouflage, Chemical Agent Resistant Coatings (CARC), infrared reflective, thermal IR, conductive and anti-static coatings.

ANAC visible camouflage, CARC, infrared reflective, thermal IR, conductive and anti-static coatings are recognized for quality, endurance and performance. Our technical expertise and attention to customers' needs consistently yields innovative, next-generation, environmentally compliant products.

AIRCRAFT PRIMERS AND COATINGS

As the leading global manufacturer of high solids exterior primers and topcoats, our customers depend on Akzo Nobel Aerospace Coatings to reflect quality, reliability, safety and exceptional appearance. ANAC consistently delivers durable protective coatings. We set the standards for first-time quality success and have the most reliable lead times in the industry.

By incorporating the latest advances in color control technology, our systems provide the fastest, most accurate color matches to meet your urgent needs, while ensuring absolute color accuracy time after time.

GLOBAL AEROSPACE SPECIFICATIONS

ANAC is the global leader in the supply of aerospace coatings to a worldwide customer base. Serving the commercial, general aviation and military market segments with technically innovative specialty materials, our products are approved by over 60 OEMs, representing 250 varied specifications such as Airbus Industries, BAE Systems, Boeing, Bombardier / Canadair, Cessna and the US military.

AKZO NOBEL COATINGS

Akzo Nobel is the biggest paint company in the world, having developed and supplied innovative coatings products for more than 200 years.

The coatings group commands leading market positions in almost all its businesses and has earned a global reputation for producing reliable top quality brands, unrivalled technologies, first class service and flexible distribution solutions. Remaining committed to environmental responsibility is also a key feature of our activities.

With operational bases in 60 countries, Akzo Nobel's coatings businesses employ around 30,000 people. Research and development plays a vital role, underlined by the company&squo;s continued success in adding groundbreaking products to its technology-driven portfolio of global brands.

Fri, 6 Jun 08
First UK MoD Tank Containers from WEW
http://www.army-technology.com/contractors/logistics/wew/press1.html
WEW of Weitefeld, Germany announce that they have been awarded a contract by MOD UK to supply 25 fuel tank container systems to the British Army for use in operations overseas. MOD is acquiring the systems to fill an identified capability gap. WEW will build the tank Containers at their Weitefeld site including autarkic diesel power-pack supplied by Alfons Haar of Hamburg, Germany.

The Pump Modules are the first of a new type (KPA 400 B) to be provided by Alfons Haar - building on the success of the original KPA 400 A, of which over 900 modules are in military use worldwide.

The new units will provide the British Army with a significant improvement in fuel delivery capability. The units can be transported by standard DROPS vehicle and MOD UK intends to use the new SVEPLS MAN built trucks (that are also on order) as the â€œprime-moverâ€. After unloading the container the system can be operated completely independent of the DROPS vehicle using its autarkic diesel-driven pump.

The order was obtained by WEW under Urgent Operational Requirement (UOR) procedures when WEW provided the winning tender in open competition. Invitation to Tender was issued in February 2008 and deliveries of the first production Tank Containers will begin in October 2008; pre-production prototype testing was completed in mid May, 2008. The timescale has greatly impressed MOD officials for a UOR of this volume, especially for a new item. The UOR was managed by the MoD's GSV-IPT, since the units will be carried by the vehicles that the IPT is also procuring.

In service, the unit needs no additional preparatory work such as trenching/bunding, a typical requirement of traditional pillow-tank solutions. This yields substantial time and manpower savings, of especial importance in forward deployment situations. Further, WEW's full IMO 1 design requires no problematic de-gassing operations for return deep-sea transport.

The tanks can be transported full or partially empty without any prior preparation for shipping. Build to ISO standards, the reduced-height WEW tank containers can be also handled with DROPS. This gives MOD UK a great deal of flexibility in transporting and handling the units, both through commercial ISO supply-chains and also with their new and sophisticated trucks.

The full IMO 1 units integrate a non-cylindrical pressure-vessel in a patented double-shell design. The elliptical pressure-vessel form reduces the centre of gravity and, during the British Army's trials, it was once again shown that this particular WEW tank design is extremely well suited for off road operations for fuel and water transport.

WEW's water tank variant with similar basic design is in use in large quantities with both the German and US Armies. German, Belgian and other Nato forces also use the full-height fuel variant with a capacity of 22,500L. WEW's patented double shell design ensures that the units comply with the strictest environmental regulations and the designs fulfil all national and international transport regulations for IMO 1.

In common with most WEW designs, the DROPS fuel Tank Container incorporates many internationally patented innovations.

Fri, 6 Jun 08
Merc Storms the Aerospace Market - Farnborough International Airshow - 14-20 July 2008
http://www.army-technology.com/contractors/manufacture/merc/press2.html
North West Precision Engineering company, Merc Engineering UK Ltd, invests vast amounts to secure new orders in the Aerospace Market.

In order to sustain the company's impressive rate of growth and facilitate the ever increasing work load, Merc Engineering has been investing heavily in state-of-the-art machinery over the past 15 months with a total of 6 new CNC machines worth a total of Â£766,000. Industry downturn announcements for 2008-2009 have not slowed down Merc's investments, and Merc's Managing Director, Les Nuttall visited the MACH show in April to finalise the acquisition of a second Doosan Puma MX2000 ST 13-axis Mill-Turn Centre, offering the capability to produce complex parts in one hit.

With tougher competition from Eastern Europe and South-East Asia, Mr Nuttall believes that investments in state-of-the-art machinery and highly skilled people will provide the necessary drive to push the Company towards its target status as a World Class Manufacturer, enabling it to provide its customers with the best product and service possible, and secure the Company's place in the future precision market.

Merc's investments do are not restricted to the purchase of new machinery. In order to speed up Merc's expansion in the Aerospace market, the company recently acquired local company Bright Spark Engineering and their property for a value of Â£1.2 million.

Bright Spark Engineering has significant expertise in 5-axis horizontal machining and it counts the Aerospace industry as one of its most prolific markets serving various prestigious Aerospace groups. The Aerospace sector can be extremely competitive and most of the components supplied are complex in nature and require very tight deadlines as well as critical tolerances.

Bright Spark believes its position as a recognised supplier to the Aerospace sector is due to its investment in technology as well as the flexibility and technical know-how of its people. The company is approved to the AS 9100 Aerospace standard, and they have been responsible for producing components for all manner of Aerospace and aircraft interior devices including military seating, commercial seating, and bed seats for Virgin's first class cabins.

"With Bright Spark on board, and with AS 9100, I know we can make this market a big success for us. Aircraft manufacturers require suppliers they can rely on at any time, who can produce the high quality of parts required for such a critical industry," says Mr Nuttall.

Merc already benefits from a history of manufacturing parts for the Aerospace Industry, having manufactured parts for Rolls Royce for over 15 years. Merc however specialises in the military side of the Aerospace market, having been involved in the prototyping and development of prestigious projects such as the ASRAAM missile and the 1000lb Bomb for Royal Ordnance. Merc is currently going through the process of getting approved to AS 9100 in order to secure more aerospace contracts for flying parts.

The combination of the EDM Charmilles section at Merc Engineering with the Mazak Integrex and Horizontal Machining Centres at Bright Spark has boosted the group's performance and productivity for a range of Aerospace components and working to extremely tight tolerances is something that is part of the day-to-day running of both companies.

Merc will be showcasing their recent success at the 46th year of the Farnborough International Airshow in July 2008. The company has booked a stand on the NWAA (North West Aerospace Alliance) pavilion, stand D14, Hall 1. Now held bi-annually, the Show will celebrate its 60th Anniversary, as it was held for the very first time at the Farnborough Aerodrome in 1948. Merc is confident that the show will lead to an increased profile in the Aerospace industry.

Wed, 4 Jun 08
Surveillance Consulting Group
http://www.army-technology.com/contractors/surveillance/scg
Surveillance Consulting Group (SCG), founded in 1997 by former communication and information systems experts, is a leading company dedicated to producing high-value products and solutions adapted to the clients' specific needs - needs that change and develop continuously due to political and cultural developments and the evolution of technology.

Our business success is driven by our long-term strategy of innovation, implementation of the newest technologies and continuous operational improvements. SCG brings new and creative solutions to meet our clients&squo; ever-changing needs.

STANDARD AND CAMOUFLAGED AUDIO TRANSMITTERS AND RECEIVERS

SPC offers a range of standard, camouflaged and remote-controlled audio transmitters and receivers for a variety of situations and a range of surveillance work. Accessories include remote controls and equipment for monitoring telephone conversations.

VIDEO SURVEILLANCE EQUIPMENT

Our engineers have developed an extensive array of video surveillance equipment ranging from sub-miniature cameras camouflaged in eye or sunglasses or buttons, to long-range transmitters and a variety of video and audio receivers for indoor or outdoor use.

COUNTERINTELLIGENCE DEVICES

Our range of counterintelligence devices includes professional detection sets allowing for the identification and localization of any RF transmitters and hidden wires. Multipurpose sweeping devices are designed to detect and locate facilities for unauthorized information transmission as well as revealing natural and artificial channels of information leakage. Non-linear junction detectors, electromagnetic field detectors, and radio monitoring devices are also available.

Our PP-VIII network analyser protects against eavesdropping. The advanced, automatic radio scanner allows for instant detection of various types of RF transmitters in the frequency range 36MHz - 3600MHz. The system is based on an ultrafast scanner in combination with a spectrum memory and can detect intrusions in just eight seconds.

DUALBAND MOBILE PHONE

The ability to quickly exchange confidential information over mobile phones is essential for rapid decision making, particularly at higher levels of management. In standard GSM transmission, data is only encrypted between the mobile phone and the base station. Beyond that, the call is routed via radio relay or fixed networks without any protection. Some countries&squo; systems do not meet even the most minimal security requirements for mobile communication. The Crypto GSM from SCG has been developed so that confidential information can be exchanged reliably and without risk of eavesdropping.

The basis of the Crypto GSM is the Siemens dualband mobile phone S 35i. The core, however, is the crypto module. Its tiny size allows it to be completely integrated into the S 35i, so that the Crypto GSM cannot be distinguished from a normal Siemens S 35i handset. In addition to the encryption function, the Crypto GSM offers all the advantages of the latest-generation mobile phones, including superior call clarity and internet access.

BOMB JAMMERS AND X-RAY SYSTEMS

As a leading manufacturer with widely acknowledged expertise in security industries, we are very aware that terrorism has drastically changed our world. We aim to deliver the most efficient countermeasures and equipment, including bomb jammers and x-ray systems) to protect against these worldwide threats.

NON-RESTRICTED AND RESTRICTED SPECIALITY ELECTRONICS

SCG&squo;s products are divided into two sectors: the non-restricted area and the restricted area for governments and law enforcement departments and agencies.

Please contact us to apply for access to the restricted area or use the application form provided on our website.

SERVICES AND SUPPORT

A leader in consulting, SCG offers solutions for the whole range of security challenges - from designing your special surveillance system, to evaluating risks and determining leakages from within your communication system.

SCG offer its customers the following services:

Design and manufacture to clients' needs and specifications Integration of clients' pre-existing equipment with new technology Design of expansible systems to meet clients&squo; changing needs Demonstration of equipment Sweepings

Wed, 4 Jun 08
ZF Great Britain
http://www.army-technology.com/contractors/propulsion/zf-gb
ZF transmissions are used widely in tactical platforms, logistic vehicles, and naval vessels throughout the world. ZF Great Britain has extensive experience supporting the full range of ZF products. This technical support is available to defence forces throughout the British Isles and in theatres of operation wherever they are deployed. ZFGB provides vehicle-side diagnostic support, service assistance, specified repair and overhaul programmes, as well as technical advice or documentation forZF products and installations.

ZF AUTOMATIC TRANSMISSIONS IN MAN SX AND HX RANGES

ZF Ecomat powershift gearboxes and ZF AS-Tronic AMT transmissions have been specified in the MAN multi-wheeled medium and improved-medium mobility cargo carriers for the Ministry of Defence. These electronically controlled transmissions provide two pedal control and automatic selection of the optimal gear in all operating conditions.

BAE SYSTEMS AS90 SELF-PROPELLED GUN WITH ZF 4LSG2000 STEERING TRANSMISSION

ZF Great Britain has actively supported the AS90 howitzer platform throughout its life, delivering a sustained factory-based transmission overhaul and repair program. Diagnostic and system optimisation has also been provided in the field by ZF Great Britain DMR technicians, to vehicles deployed in Iraq, Canada and Europe.

ZF ECOMAT IN WHEELED DEFENCE AND LOGISTIC APPLICATIONS

Around 2500 ZF Ecomats are in service with the British Army. The six-speed ZF 6HP500 and 6HP600 ranges are widely used in modern defence vehicles. DROPS (Foden & Leyland produced versions), M3 and BR90 bridge vehicles are all in service with the tried-and-tested Ecomat family of automatic torque convertor gearboxes. Further Ecomat applications, including the general dynamics FRES platform, and MOWAG Piranha are entering service all fitted with Ecomat derivatives, including the HP902 transmission range.

ZF KEEPING THE BRITISH ARMY ON THE MOVE

ZF products figure across the military vehicle weight range. This includes the car-derived ZF 4HP22 in the BAe systems Pinzgauer and ZF 6HP260 in the Iveco LMV Panther, through the Kalmar RTCH with the ZF 4WG310 powershift transmission, to the BAe Haglunds FBRV fitted with the ZF 4HP250 steering transmission, which features in the Leopard 1 MBT.

Wed, 4 Jun 08
Voxtec International
http://www.army-technology.com/contractors/navigation/voxtec
Voxtec International is the recognized leader in machine-based, mobile, speech-to-speech translation solutions that address our world&squo;s growing communication needs. From the beginning, Voxtec has distinguished itself through its innovative research, development and thought leadership, combined with world-class product development execution.

The bottom line: Voxtec delivers superior translation products and services that successfully meet the needs of today, with a keen eye toward the growing communication challenges of tomorrow.

MILITARY VOICE-TRANSLATION DEVICES

Today&squo;s military operations are being played out across multiple borders, among civilians speaking many languages with scores of dialects. The number of available interpreters simply cannot keep up with this ever-growing need. Voxtec understands, and has the expertise to help. From Afghanistan and Iraq to Southeast Asia, we&squo;ve supported the United States Military and coalition forces with rugged, reliable, easy-to-use voice translation devices that help service members collect actionable intelligence.

As the scope of operations in the Middle East shifts from tactical to humanitarian, it&squo;s vital for service members to reach across language barriers to achieve their objectives.

PHRASELATOR P2 SPEECH-TO-SPEECH TRANSLATION DEVICES

The mobile, ruggedly designed Voxtec Phraselator P2 is the most powerful one-way, handheld, speech-to-speech translation device available. Originally developed for use by US Military, the P2 has aided the tactical and humanitarian needs of thousands of service personnel in Iraq, Afghanistan and Southeast Asia. Based on its success in these challenging environments, the P2 has also been called upon to meet the critical communication needs of law enforcement and corrections officers, emergency medical technicians, construction superintendents and many others.

The key features of the Phraselator P2 include:

Three translation modes: voice-activated speech input; tap the desired phrase on the touchscreen; or use the toggle button to scroll and select the desired phrase

No voice training required: translation can be conducted right out of the box

Clear communication: built-in acoustic technology ensures clear translations in high-noise environments

Custom language modules: if you have access to an interpreter, you can create and record your own custom language modules

Record mode: auto digital recording with timestamp capabilities allows users to record several hours of foreign-language responses

"My favorites" category: commonly used or mission-specific phrases can be grouped into a "my favorites" category for quick access

Foreign language text display

Full-color touch screen

The SQUID SQ.200 VOICE-ACTIVATED TRANSLATION DEVICE

The SQUID SQ.200 is Voxtec&squo;s voice-activated language translation device. Designed to be securely worn on your chest within a device holster (included), the SQUID offers hands-free, eyes-free language translation capabilities, allowing users to focus attention on their tasks, not their equipment.

Engineered with the same rugged construction as our legendary Phraselator P2, the SQUID offers access to over 2,000 phrases, giving military, law enforcement, first responders and correctional officers unparalleled communication control.

APPLICATIONS

Service members conducting checkpoint operations and disturbance investigations benefit greatly from tools that act as force multipliers. In these situations, they rely on Voxtec translation devices to inform and prepare civilians for search procedures in a calm, accurate manner.

Humanitarian efforts require specialized tactics that allow service members to reassure citizens and collect actionable intelligence. Language modules stored within Voxtec devices provide service members the ability to identify peacekeeping forces, administer aid and collect intelligence relating to the locations of insurgents or weapons.

To maximize its effectiveness in all situations, our PhraselatorÂ® P2 device is equipped with the ability to record several hours of commentary. For example, lengthy responses to open-ended questions such as, "Tell me what you have seen," can be captured in the speaker&squo;s native language and later translated back to English using a trusted translator.

Tue, 3 Jun 08
Smiths Detection Selects Parvus DuraCOR(R) 810 Computing Sub-System for Chemical Biological Protective Shelter
http://www.army-technology.com/contractors/computers/parvus-corp/press2.html
Parvus Corporation today announced that Smiths Detection has awarded the company an IQID contract extending out to 2016 for DuraCOR*#174; 810 processor sub-systems in connection with Smiths Detection's Chemical Biological Protective Shelter (CBPS). No financial terms were disclosed.

Smiths Detection has specified the Parvus DuraCOR 810 as the Central Computing Unit (CPU) for its CBPS environmental control system. CBPS shelters provide medical personnel and soldiers a highly mobile, self-contained collective protection system. With a contamination free, environmentally controlled working area, these shelters serve medical combat services and combat service support personnel as mobile medical aid stations, field command posts or emergency facilities.

"It is very satisfying to have our products selected for such a strategic program with global and far-reaching impact," said Thomas L. Breault, Parvus Director of Military & Government Programs, Eastern Region. "We are pleased to supply Smiths Detection with the DuraCOR 810 and contribute to the protection and capabilities of America's warfighters."

Deployed across various unmanned and manned aircraft, ground vehicle, and naval installations, the rugged DuraCOR 810 is a Commercial-off-the-Shelf (COTS) open-architecture solution for military/civil Command, Control, Communications, Computer, Intelligence, Surveillance and Reconnaissance (C4ISR) applications. It is designed to survive harsh mobile environmental conditions experienced under MIL-STD-810F, including extreme temperatures, shock/vibration, and ingress, as well as power surge and voltage requirements of MIL-STD-1275D and MIL-STD-704E.